FILTER PRODUCTS

to
to
to

Transceiver

FIBERROAD ’s FRSX-1L321C Transceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses a 1310 nm FP laser, up to 15dB link budge ensure this ...

Specifications

Signaling Rate Per Lane (Transmitter): 1.25 Gb/s
Signaling Rate Per Lane (Receiver): 1.25 Gb/s
Lane Center Wavelength: 1310 nm
The SX51-01 is an optical subsystem with bi-directional capabilities. The subsystems are available as either the transmitter or receiver subassembly supporting up to 14 Gbps using four video- or data-lanes (4 x 3.5 Gbps) along with a simultaneous bi-directional 5 Mbps data and communication channel, all on just one multimode ...

Specifications

Signaling Rate Per Lane (Transmitter): 3.5 Gb/s
Signaling Rate Per Lane (Receiver): 3.5 Gb/s
Lane Center Wavelength: 860 nm
GLSUN Optical Transceiver product category are many form factors including: SFP, SFP+, SFP28, XFP, QSFP+, and QSFP28; rates including: 1G (1000Base-SX), 2.5G (2500Base-SX), 10G (SFP-10G-SR, SFP-10G-LR), 25G (SFP-25G-LR, popular in emerging 5G networks), 40G (QSFP-40G-LR4) and 100G (QSFP-100G-LR4, QSFP-100G-CWDM4). We have compatible ...

Specifications

Signaling Rate Per Lane (Transmitter): 1~100 Gb/s
Signaling Rate Per Lane (Receiver): 1~100 Gb/s
Lane Center Wavelength: 850, 1310, 1550 nm
Transmission Distance: 100m~120km
The 400G QSFP-DD passive electrical loopback module is used for high speed testing application for QSFP-DD host ports. It provides an efficient way to verify QSFP-DD ports during R&D test, production testing and field testing. QSFP-DD Loopback Module Specification Differential Impedance: 100 +/- 10OhmSupply Voltage: 3.3V ...

Specifications

Signaling Rate Per Lane (Transmitter): 400 Gb/s
Signaling Rate Per Lane (Receiver): 400 Gb/s
Lane Center Wavelength: 850-1550 nm
Vendor Name: LightOptics
Form Factor: QSFP-DD
There are 4 different Transceiver from suppliers and manufacturers listed in this category. In just a few clicks you can compare different Transceiver with each other and get an accurate quote based on your needs and specifications. Please note that the prices of Transceiver vary significantly for different products based on various factors including technical parameters, features, brand name, etc. Please contact suppliers directly to inquire about the details and accurate pricing information for any product model. Simply navigate to the product page of interest and use the orange button to directly reach out to the respective supplier with one click.

Did You know?

A transceiver (short for transmitter-receiver) in optical networks is a device that can transmit and receive data over optical fibers. It combines a transmitter, which converts electrical signals into optical signals, and a receiver, which converts optical signals back into electrical signals. Transceivers are used in many applications in optical networking, including Ethernet, Fibre Channel, and SONET/SDH networks. They come in various form factors, including Small Form-factor Pluggable (SFP) and Quad Small Form-factor Pluggable (QSFP), and can support various data rates and transmission distances depending on the network requirements. Transceivers play a critical role in optical networking as they allow for the efficient and reliable transmission of data over long distances.