C4-1280-GigE Smart High Speed CMOS Camera
Description
Acquiring height profiles and height images by means of laser sheet-of-light (triangulation) technique, a laser line is projected on the object, the resulting sensor image being evaluated by the camera core and converted into a single height profile By scanning the laser line over the object, a complete height image of the object can be acquired. The camera's ability to complete the 3D calculations inside the camera enables it to acquire up to 72 000 profiles per second. For maximum flexibility, three profile algorithms are included without the choice of the profile influencing the profile speed. This results that the profile date are always output at the same maximum speed. The C4 sensor is capable of delivering position data as well as additional features (eg intensity, line width) without sacrificing profile speed. An additional feature of the camera is that up to four sensor AOIs can be designed for dividing the sensor in separate subwindows. The camera has a Gigabit-ethernet Interface (GigE Vision-compliant) and, in combination with the GenICam protocol, the efforts required for its integration are reduced to a minimum. The configuration is done in a very fast and simple way via Plug-and-play and the camera is accessed using standard interfaces making the use of manufacturer-specific software libraries is no longer necessary.
C4-1280-GigE Smart High Speed CMOS Camera
Specifications |
|
---|---|
Sensor Type: | CMOS |
# Pixels (Width): | 1280 |
# Pixels (Height): | 1024 |
Pixel Size (Square): | 14 um |
Peak Quantum Efficiency: | -- % |
Full Frame Rate: | 500 fps |
Bit Depth: | 10 bit |
Features
Non-contact 3D measurement
1 GB image processing memory
Image processing integrated in the camera.
Data transmission via Gigabit Ethernet
Selection of 3D camera algorithms
All algorithms achieve the maximum profile rate
Simple configuration
Genuine global snapshot shutter for accurate profiles
Up to 4 freely selectable AOIs
Easy integration into machine vision systems
Integrated control for external illumination
Enhanced 3D imaging with High Dynamic Range 3D
Applications
Inspection of tyres and rubber gaskets
Inspection of connection rods
Inspection of printed circuit boards
Inspection of glue beads
3D inspection of packaging
Inspection of sintered component
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
Australia
-
Sold by:
-
On FindLight:
External Vendor
Claim Adept Turnkey Page to edit and add data
Frequently Asked Questions
The camera is capable of acquiring up to 72,000 profiles per second.
Up to four sensor AOIs can be designed for dividing the sensor in separate subwindows.
The camera is used for acquiring height profiles and height images by means of laser sheet-of-light (triangulation) technique.
The Gigabit-ethernet Interface is used for data transmission and is GigE Vision-compliant.
The camera can be used for inspection of tyres and rubber gaskets, connection rods, printed circuit boards, glue beads, packaging, and sintered components.