C4-2040-GigE High Speed CMOS Camera
Description
Acquiring height profiles and height images by means of laser sheet-of-light (triangulation) technique, a laser line is projected on the object, the resulting sensor image being evaluated by the camera core and converted into a single height profile By scanning the laser line over the object, a complete height image of the object can be acquired. The camera's ability to complete the 3D calculations inside the camera enables it to acquire up to 32 000 profiles per second. For maximum flexibility, three profile algorithms are included without the choice of the profile influencing the profile speed. This results that the profile date are always output at the same maximum speed. Also, the 3D sensor uses a global shutter and exposes all pixels at the same time leaving to very sharp and clear images. The camera supports HDR-3D technology which enables the readout of the sensor with Multi-Slope and Multi-Frame Readout enabling the camera to reach a dynamic of up to 90db, scanning even materials and surfaces with inhomogeneous reflectivity properties. The C4 sensor is capable of delivering position data as well as additional features (eg intensity, line width) without sacrificing profile speed. An additional feature of the camera is that up to four sensor AOIs can be designed for dividing the sensor in separate subwindows. Another key attribute for fast 3D-measuring is the high light-sensitivity of the sensors and their enhanced sensitivity in the NIR spectrum. The camera has a Gigabit-ethernet Interface (GigE Vision-compliant) and, in combination with the GenICam protocol, the efforts required for its integration are reduced to a minimum. The configuration is done in a very fast and simple way via Plug-and-play and the camera is accessed using standard interfaces making the use of manufacturer-specific software libraries is no longer necessary.
C4-2040-GigE High Speed CMOS Camera
Specifications |
|
|---|---|
| Sensor Type: | CMOS |
| # Pixels (Width): | 2048 |
| # Pixels (Height): | 1088 |
| Pixel Size (Square): | 5.5 um |
| Peak Quantum Efficiency: | -- % |
| Full Frame Rate: | 340 fps |
| Bit Depth: | 10 bit |
Features
Non-contact 3D measurement
Measuring speed up to 30 KHz
Image processing integrated in the camera.
Data transmission via Gigabit Ethernet
Selection of 3D camera algorithms
All algorithms achieve the maximum profile rate
Simple configuration
Genuine global snapshot shutter for accurate profiles
Up to 4 freely-selectable AOIs
Flexible trigger functions
Integrated control for external illumination
Enhanced 3D imaging with High Dynamic Range 3D
Applications
Inspection of tyres and rubber gaskets
Inspection of connection rods
Inspection of printed circuit boards
Inspection of glue beads
3D inspection of packaging
Inspection of sintered component
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Australia
-
Sold by:
-
On FindLight:
External Vendor
Claim Adept Turnkey Page to edit and add data
Frequently Asked Questions
The camera can acquire up to 32,000 profiles per second.
Up to four sensor AOIs can be designed for dividing the sensor in separate subwindows.
The C4-2040-GigE High Speed CMOS Camera is used for non-contact 3D measurement.
The HDR-3D technology enables the camera to reach a dynamic of up to 90db, scanning even materials and surfaces with inhomogeneous reflectivity properties.
The camera has a Gigabit-ethernet Interface (GigE Vision-compliant) and, in combination with the GenICam protocol, the efforts required for its integration are reduced to a minimum.