PCO FLIM Camera System
Description
The FLIM camera system pco.flim includes a complete frequency synthesizer, which is required for the generation of the modulation signals in the frequency domain. Therefore the only additional device needed for FLIM measurements is an appropriate excitation light source, which can use either sinusoidal or rectangular modulation signals and a dark gate signal to switch off the light during readout of an image. The pco.flim has a resolution of 1008 x 1008 pixels and can read out a maximum of 90 double images/s. The effective frame rate is about 20 frames/s, due to the fact that a minimum of 2 double images have to be read out for a proper sine fit and this has to be done twice for a proper asymmetry correction. The camera system can be operated at a single frequency or multiple frequencies in the range of 5 kHz – 40 MHz and it can perform an asymmetry correction even before image readout.
PCO FLIM Camera System
Specifications |
|
|---|---|
| Sensor Type: | CMOS |
| # Pixels (Width): | 1008 |
| # Pixels (Height): | 1008 |
| Pixel Size (Square): | 5.6 um |
| Peak Quantum Efficiency: | 39 % |
| Full Frame Rate: | 90 fps |
| Bit Depth: | 14 bit |
Features
frequency synthesizer 5 kHz - 40 MHz
high frame rate up to 90 fps
unique resolution 1008 x 1008 pixels
lifetimes from 100 ps to 100 μs
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
External Vendor
Claim PCO Page to edit and add data
Frequently Asked Questions
The pco.flim camera system has a unique resolution of 1008 x 1008 pixels.
The pco.flim camera system can read out a maximum of 90 double images/s, but the effective frame rate is about 20 frames/s.
The pco.flim camera system can operate at a single frequency or multiple frequencies in the range of 5 kHz – 40 MHz.
The only additional device needed for FLIM measurements with the pco.flim camera system is an appropriate excitation light source, which can use either sinusoidal or rectangular modulation signals and a dark gate signal to switch off the light during readout of an image.
The frequency synthesizer in the pco.flim camera system is required for the generation of the modulation signals in the frequency domain.