Photonfocus MV3-D640I-M01-144-CL-12 CMOS Camera
Description
The camera series MV3-D640I-CL is based on the Sofradir SNAKE InGaAs image sensors with CMOS read out. This InGaAs sensor with a full well capacity (FWC) of 1.44 Me- is optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The camera has the CameraLink Base interface. This camera focus on demanding applications in industrial image processing in the spectral range from 900 to 1700nm. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible.
Photonfocus MV3-D640I-M01-144-CL-12 CMOS Camera
Specifications |
|
|---|---|
| Sensor Type: | CMOS |
| # Pixels (Width): | 640 |
| # Pixels (Height): | 512 |
| Pixel Size (Square): | 15 um |
| Peak Quantum Efficiency: | 80 % |
| Full Frame Rate: | 300 fps |
| Bit Depth: | 12 bit |
Features
Sofradir SNAKE InGaAs image sensor
640 x 512 pixel resolution
Very good SWIR spectral response
Exceptional SNR up to 1200: 1
Up to 300fps @ full resolution
Global shutter
Available in monochrome SWIR
Extended sensor and camera features
Reduction of ROI in x- and y-direction increases frame rate
256 MROI for hypersprectral imaging
Up to 12 bit greyscale resolution
16 bit in 1 tap output mode
CameraLink® interface
Applications
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Switzerland
-
Sold by:
-
On FindLight:
External Vendor
Claim Photonfocus AG Page to edit and add data
Frequently Asked Questions
The resolution of the camera is 640 x 512 pixels.
The camera focuses on demanding applications in industrial image processing in the spectral range from 900 to 1700nm.
The InGaAs sensor used in the camera has a full well capacity (FWC) of 1.44 Me-.
The camera can achieve up to 300fps at full resolution.
The camera has the CameraLink Base interface.