LARRY USB3648+ Scientific-grade CCD Linear Array Detector
Description
The LARRY USB3648+ is a CCD linear array detectors that offers cost-effective, scientific-grade performance for a wide range of spectroscopic applications. It can be mounted to most spectrographs that have the output plane 10mm outside of the spectrograph. Standard and custom mounts are available. The LARRY series is based on proven Ocean Optics electronics and is compatible with Ocean Optics software, enabling a broad scope of features. The detectors connect to and are controlled by a PC (Windows 7, 8, ) via USB 2.0, allowing for easy-to-use, plug-and-play operation. Multiple detectors can be controlled, enabling simultaneous acquisition. GPIO communication can also be used to integrate with other instruments and devices. The linear CCDs used in the LARRY series contain built-in electronic shutters, which allow for integration times down to 1 ms without the need for external shutters.
LARRY USB3648+ Scientific-grade CCD Linear Array Detector
Specifications |
|
|---|---|
| # Pixels (Resolution): | <=4000 |
| Pixel Size: | 10um X 200um, Other |
| Frame Rate: | -- scans/sec |
Features
2048 and 3648 pixel linear arrays
14 μm and 8 μm pixel width & spacing
pixel height 200 microns for spectroscopic applications
Scientific grade,no fringing
Fast, built-in electronic shutter capability
Max. dynamic range >2000:1
Spectral range: 200-1100 nm
Rapid acquisition up to 500 spectra/second with 1ms integration time
USB3648+ detector optional short pulse mode, integration times down to 10 microseconds with real time acquisition rates.
USB 2.0 for plug-and-play PC control
Powered via USB
GPIO for easy integration with other instruments and devices
External trigger and sync output via SBC (subminiature BNC) with programmable delays for synchronization to pulsed sources
Applications
Upgrade optical spectrometers to linear CCD array capability
Capturing spectra of short-pulse events
Synchronization to pulsed lasers and light sources
Fringe analysis, beam profiling/monitoring
Synchronous and simultaneous detection with multiple detectors
Thorlabs cage mount interface available
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Australia
-
Sold by:
-
On FindLight:
External Vendor
Claim Ames Photonics Inc Page to edit and add data
Frequently Asked Questions
The LARRY USB3648+ detector has pixel dimensions of 2048 and 3648.
The LARRY USB3648+ detector has pixel width and spacing options of 14 μm and 8 μm.
The spectral range of the LARRY USB3648+ detector is 200-1100 nm.
Yes, the LARRY USB3648+ detector can be controlled by multiple detectors simultaneously.
Yes, the LARRY USB3648+ detector has a built-in electronic shutter capability, allowing for integration times down to 1 ms without the need for external shutters.