Two-Wavelength Lidar LSA-2c
Description
Lidar of medium power (with a mirror 26 cm in diameter), allows remotely determine the mass of aerosol emissions from industrial enterprises, smoke from fires and dust aerosol transported from desert. Range is up to 6 km. Lidar action is based on measurement of intensity of radiation scattered by aerosol particles. The lidarsends short light pulses with different wavelengths and receives a backscattered signal. Light scattering by industrial aerosols (for instance, cement particles) at different wavelengths and measurement of depolarization of light radiation allows to determine particle sizes and total mass. Lidars can determine characteristics of aerosols in any direction of the top hemisphere.
Two-Wavelength Lidar LSA-2c
Specifications |
|
|---|---|
| Laser Wavelength: | -- nm |
| Scanning Angle: | -- deg |
| Scanning Frequency Range: | 1-1Hz |
| Angular Resolution: | -- deg |
| Measurement Range: | 1-6000m |
| Distance Resolution: | -- mm |
Features
- industrial enterprises (cement, metallurgical works);
- technical explosion works;
- for early detection of fires (smoke formation are registered significantly earlier than by sight).
Lidars can also be used for research of clouds, fogs, atmospheric aerosol and dust storms.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Russia
-
Sold by:
-
On FindLight:
External Vendor
Claim Photonics Technology Obninsk Page to edit and add data
Frequently Asked Questions
The Lidar sends short light pulses with different wavelengths and receives a backscattered signal. Light scattering by industrial aerosols at different wavelengths and measurement of depolarization of light radiation allows to determine particle sizes and total mass.
The features of the LSA-2c Lidar are that it can be used for industrial enterprises (cement, metallurgical works), technical explosion works, and for early detection of fires.
The LSA-2c Lidar is used to remotely determine the mass of aerosol emissions from industrial enterprises, smoke from fires and dust aerosol transported from the desert.
The range of the LSA-2c Lidar is up to 6 km.
The Lidars, designed and manufactured by Photonics Technology Obninsk were delivered to Belgorod State University, Russia, Tenerife, Canary islands, Spain, Shiraz, Iran, Lisbon, Portugal, Suwon, South Korea, Hafez, China, Teplokluchenka, Kirhgizia.