EMIRS50 TO46 with Reflector 5
Description
Axetris infrared (IR) sources are micro-machined,
electrically modulated thermal infrared emitters
featuring true blackbody radiation characteristics, low
power consumption, high emissivity and a long lifetime.
The appropriate design is based on a resistive heating
element deposited onto a thin dielectric membrane
which is suspended on a micro-machined silicon
structure.
EMIRS50 TO46 with Reflector 5
Specifications |
|
|---|---|
| Wavelength: | 8000 nm |
| Output Power (typical): | 0.95 mW |
| Emission Angle: | N/A degree |
Features
Key features for all Axetris infrared sources
- True black body radiation (2 to 14 μm)
- High emissivity
- Fast electrical modulation (no chopper wheel required)
- High modulation depth
- Energy efficient (excellent optical output)
- Superior lifetime
Special EMIRS50 Features (compared to EMIRS200)
- 3x smaller
- 2x more efficient
- 3x faster
- Excellent signal-to-noise ratio (due to higher frequency)
Applications
- Measurement principles: non-dispersive infrared
spectroscopy (NDIR), photoacoustic infrared
spectroscopy (PAS) or attenuated-total-reflectance
FTIR spectroscopy (ATR) - Target gases: CO, CO2, VOC, NOX, NH3, SOX, SF6,
hydrocarbons, humidity, anesthetic agents,
refrigerants, breath alcohols - Medical: Capnography, anesthesia gas monitoring,
respiration monitoring, pulmonary diagnostics, blood
gas analysis - Industrial Applications: Combustible and toxic gas
detection, refrigerant monitoring, flame detection,
fruit ripening monitoring, SF6 monitoring, semiconductor
fabrication - Automotive: CO2 automotive refrigerant monitoring,
alcohol detection & interlock, cabin air quality - Environmental: Heating, ventilating and air
conditioning (HVAC), indoor air quality and VOC
monitoring, air quality monitoring
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Switzerland
-
Sold by:
-
On FindLight:
External Vendor
Claim Axetris AG A Leister Group Page to edit and add data
Frequently Asked Questions
Some absolute maximum ratings for the EMIRS50 include a heater membrane temperature of 500°C, an optical output power of 5.0 mW, and an electrical cold resistance of RC22 at 22°C.
The EMIRS50 can be used in a variety of applications, including non-dispersive infrared spectroscopy (NDIR), photoacoustic infrared spectroscopy (PAS), attenuated-total-reflectance FTIR spectroscopy (ATR), medical applications such as capnography and anesthesia gas monitoring, industrial applications such as combustible and toxic gas detection, and environmental applications such as air quality monitoring.
The EMIRS50 is 3x smaller, 2x more efficient, 3x faster, and has an excellent signal-to-noise ratio due to its higher frequency compared to the EMIRS200.
Some key features of Axetris infrared sources include true black body radiation, high emissivity, fast electrical modulation, high modulation depth, energy efficiency, and a long lifetime.
The EMIRS50 TO46 with Reflector 5 is a thermal MEMS based infrared source that is electrically modulated and features true blackbody radiation characteristics.