EOS P 810 and HT-23 First High-Temperature Polymer Laser Sintering Solution
Description
With a building volume of 700 x 380x 380mm, EOS P 810 enables a fast and cost-efficient production of plastic parts directly from CAD data. Parts made out of HT-23 material offer high strength at low weight and withstand high temperatures. Thanks to improved recoating speed, fast digital scanners and high-power lasers the building time is significantly reduced and thus productivity increased.
HT-23 a Polyetherketoneketone (PEKK) material with encapsulated carbon fiber reinforcement is inherently flame retardant, UV resistant and meets regulations of the aerospace (FAR 25.853) and mobility industry (EN 45545).
EOS P 810 and HT-23 First High-Temperature Polymer Laser Sintering Solution
Specifications |
|
---|---|
Laser Printing Technology: | Selective Laser Sintering (SLS) |
Laser Type: | CO2 Laser |
Average Laser Power: | 140 W |
Laser Wavelength: | 10600 nm |
Laser Spot Size (XY Resolution): | -- um |
Layer Thickness (Z Resolution): | 120 um |
Build Speed: | 10 mm/h |
Scan Speed: | 6000 mm/sec |
Print Material: | Polymer |
Print Environment: | Not Specified |
Material Refresh Rate: | 1-1% |
Build Volume (W): | 700 mm |
Build Volume (H): | 3800 mm |
Build Volume (D): | 380 mm |
Application: | Aerospace, Other |
Features
- A robust system optimized to process HT-23. Ideally suited to manufacture large structural parts, metal replacements and serial applications.
- Thanks to improved recoating speed, fast digital scanners and high-power lasers the building time is significantly reduced and thus productivity increased.
- HT-23 a Polyetherketoneketone (PEKK) material with encapsulated carbon fiber reinforcement is inherently flame retardant, UV resistant and meets regulations of the aerospace (FAR 25.853) and mobility industry (EN 45545).
- With a low refresh rate (60% recyclable, little excess powder) HT-23 is contributing to substantially reduce cost-per-part.
- The intuitive, open and productive CAM tool EOSPRINT 2 allows quick and easy job- and process management.
- Ensure excellent mechanical part properties within the overall build volume thanks to EOSAME. This feature homogenizes the energy input per volume element.
- The feature SmartScaling in EOSPRINT 2 offers best dimensional accuracy through software based pre-compensation of part shrinkage.
- The proven spot pyrometer enables continuous and accurate temperature control.
Applications
HT-23 from Advanced Laser Materials (ALM)
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
External Vendor
EOS GmbH
Are you EOS GmbH representative? Claim This Page Today!
No one from EOS GmbH has updated the information yet
Claim EOS GmbH Page to edit and add data
Claim EOS GmbH Page to edit and add data
Frequently Asked Questions
The building volume of the EOS P 810 is 700 x 380 x 380mm (27.6 x 15 x 15 in).
The EOS P 810 uses a CO2 laser with 2 x 70 W power.
The layer thickness for the ALM HT-23 material is 120 μm.
The recommended installation space for the EOS P 810 is a minimum of 4.8 x 4.8 x 3.0 m (189 x 189 x 118 in).
The optional accessories available for the EOS P 810 include IPCM P plus, CoolDown Station, Unpacking and Sieving Station, and Blasting Cabinet.