LASER ANILOX ROLLS CLEANING SYSTEM I-LAC F50-20
Description
The new laser anilox cleaning system uses fiber laser technology to emit a beam through a series of diodes mounted on an optical fiber. The anilox cells are completely clean, achieving a nominal contribution of 100%, being able to clean any type of color, ink base or adhesive.
During the printing processes, the ink used is deposited at the bottom of the alveolus of the anilox cylinders and the volume of the cylinders is reduced and consequently, the contribution of the cylinder is reduced.
Using laser technology, the laser anilox cleaning system removes the ink from inside the cylinder cells, extracting any type of ink, glue or varnish. In this way, 100% of the initial volume of the cylinder is recovered, being able to keep the color intensity always constant.
LASER ANILOX ROLLS CLEANING SYSTEM I-LAC F50-20
Specifications |
|
|---|---|
| Material: | Other |
| Application: | Other |
| Laser Type: | Fiber |
| Laser Average Output Power: | 3000 W |
| Laser Safety Class: | |
| Wavelength: | -- nm |
| Platform Type: | Other |
Features
- The fastest cleaning system on the market today with a reduction in cleaning time of up to 80% compared to other systems.
- Capable of cleaning very high curvatures where other systems have no possibility.
- Cylinders with a maximum ink supply. The alveolus are clean and 100% intensity is maintained.
- Being the maximum intensity, the times of work repetitions are reduced.
- Cleaning of any color and type of water-based, solvent-based ink, adhesives, varnishes, hardeners, etc.
- It does not damage the surface of the material or cause wear.
- Does not generate temperature increases on the cleaning surface.
- It does not generate waste, does not require a pneumatic air supply or need a water intake, it only requires electrical power.
- The user interface allows easy operation of the machine without the need for technological knowledge.
- Compliance with international safety regulations.
- Allows cleaning of Anilox with or without shaft.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Spain
-
Sold by:
-
On FindLight:
External Vendor
Claim Inelme Page to edit and add data
Frequently Asked Questions
The system uses fiber laser technology to emit a beam through a series of diodes mounted on an optical fiber, which removes ink, glue, or varnish from inside the cylinder cells.
The system can clean any color and type of water-based, solvent-based ink, adhesives, varnishes, hardeners, etc.
No, the system does not damage the surface of the material or cause wear.
No, the system does not generate waste. It only requires electrical power and does not require a pneumatic air supply or water intake.
Yes, the system allows cleaning of anilox cylinders with or without shaft.