NarrowScan 2400 l/mm Double Grating
Description
The NarrowScan pulsed dye laser series is based on a new resonator design with a very narrow linewidth (< 0.04 cm-1) that has been optimized in design and specifications by laser experts over many years and can now be used with pump laser pulses as short as 4 ns. The laser has very rigid and massive middle and side plates, ensuring a very high stability in the oscillator and pre-amplifier.
NarrowScan 2400 l/mm Double Grating
Specifications |
|
|---|---|
| Tuning Range: | 370-710nm |
| Repetition Rate: | 1-500Hz |
| Polarization: | Unspecified |
Features
- Gratings: 1800, 2400, 3000, 3600 lines/mm
- Double-grating (bandwidth < 0.04 cm-1)
- Prismatic cell for high power output
- Frequency conversion units for doubling, trippling or mixing from 190 nm up to 4.5 μm
- „Look up“ table and /or autotracking for both conversion units
- Wavelength separation with two or four Pellin-Broka-Prism
- Temperature stabilization of the crystal-housing Improved Resonator Design
- vertical grazing incidence resonator
- larger tuning range
- lower bandwidth
- improved pulse to pulse energy stability
- Frequency stabilization
- Optogalvanic cell for laser calibration
- C++ or LabView software
- 4 digital and 4 analog inputs
- Online power monitoring of fundamental, doubled and tripled laser light
- Online bandwidth monitoring with CCD-camera
- Reversed laser design for two frequency conversion units inside the laser.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
External Vendor
Claim Radiant Dyes Laser GmbH Page to edit and add data
Frequently Asked Questions
The NarrowScan 2400 l/mm Double Grating has grating options of 1800, 2400, 3000, and 3600 lines/mm.
The double grating has a bandwidth of less than 0.04 cm-1.
The frequency conversion units can double, triple, or mix from 190 nm up to 4.5 μm.
The NarrowScan pulsed dye laser series is a laser instrument based on a new resonator design with a very narrow linewidth that has been optimized in design and specifications by laser experts over many years.
The laser can be controlled with C++ or LabView software, and has online power monitoring of fundamental, doubled, and tripled laser light, as well as online bandwidth monitoring with a CCD-camera.