LIOPSTAR DYE LASER 1800 l/mm, 90mm Grating
Description
Optional frequency conversion units
- Internal open loop frequency doubling with look-up-table
- Internal open loop frequency tripling and mixing with look-up-table
- Autotracking FCU available for second-harmonic generation (SHG), third-harmonic generation (THG), sum- and difference frequency mixing (SFM, DFM)
- Intelligent PI-control corrects phase matching deviation of the look-up-table algorithm during wavelength scans and temperature changes
- High scan speed, up to 10 nm/min
- Usable for repetition rates from < 1 Hz up to 100 kHz
- Temperature control for doubling crystal internal BBO temperature control can be set up to 70°C
LIOPSTAR DYE LASER 1800 l/mm, 90mm Grating
Specifications |
|
---|---|
Tuning Range: | 355-900nm |
Repetition Rate: | 1-1000000Hz |
Polarization: | Unspecified |
Grating: | 1800 l/mm, 90mm |
Features
- Extreme narrow linewidth down to 0,02 cm-1
- Spectral range 197nm – 5000nm
- Low ASE < 0,05%
- Third dye cell for high power pump laser
- Highly efficient laser resonator
- Exchangeable grating
- Near Gaussian beam quality due to Bethune cells
- Eroded stainless steel case for oscillator and amplifier cells
- New state-of-the-art integrated electronics and user friendly LabView Software
- Intelligent PI control for FCU autotracking unit
- Temperature stabilized crystals
- USB port
- Remote control via TCP / IP protocol
- Smallest footprint
Applications
- Laser induced fluorescence: LIF
- Photolysis
- Combustion and atmospheric studies
- Light detection and ranging: LIDAR
- Raman spectroscopy
- Coherent anti-Stokes Raman spectroscopy: CARS
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
External Vendor
Claim LIOP-TEC GmbH Page to edit and add data
Frequently Asked Questions
The LIOPSTAR Dye Laser is suitable for a variety of applications, including laser induced fluorescence (LIF), photolysis, combustion and atmospheric studies, light detection and ranging (LIDAR), Raman spectroscopy, and coherent anti-Stokes Raman spectroscopy (CARS).
The LIOPSTAR Dye Laser offers internal open loop frequency doubling and tripling with look-up-table, as well as autotracking FCU for second-harmonic generation (SHG), third-harmonic generation (THG), sum- and difference frequency mixing (SFM, DFM).
The energy output of the LIOPSTAR Dye Laser varies depending on the dye, UV/IR wavelength, and pump energy. Please refer to the datasheet for specific values.
The LIOPSTAR Dye Laser has the smallest footprint possible for a laser of its class.
The spectral range of the LIOPSTAR Dye Laser is 197nm – 5000nm.