FILTER PRODUCTS

to
to
to

Page 3 - EDFA - Erbium-Doped Fiber Amplifier Fiber Amplifiers

MAFA 5000 Series Erbium Doped Fiber Amplifier 14
EMCORE Corp
The EMCORE MAFA 5000 Series Micro Erbium Doped Fiber Amplifier (μEDFA) gain block module is an ideal building block for OEM systems integration where there is a requirement to amplify a 1550 nm signal for a broad range of applications including CATV systems, RF/microwave fiber optic links, sensing and control systems, and more. The ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1562nm
Max Output Power: 14 dBm
Nominal Gain: 2.0 dB
Optiva OTS-2O Series Micro Erbium Doped Fiber Amplifier 5014
EMCORE Corp
The Optiva OTS-2O Series uses Emcore\'s Micro Erbium Doped Fiber Amplifier (µEDFA) Gain Block Modules which is an ideal building block for system integrators to extend the fiber link for long-haul signal transport. The OTS-2OP Series is designed to meet the most demanding noise performance requirements of fiber optic communications ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1562nm
Max Output Power: 14 dBm
Nominal Gain: 2.0 dB
Two-stage EDFA With Midstage GEF
VPIphotonics
Key performance characteristics of EDFAs such as high gain, low noise figure, high output power and gain flatness can be achieved in two-stage (or three-stage) amplifiers. The two-stage design provides capabilities to suppress ASE noise by the midstage optical isolator and ASE filter, which reduces amplifier saturation and positively ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1300-1480nm
Max Output Power: 20 dBm
Nominal Gain: 5 dB
Amonics’ amplifiers incorporate unique design to produce maximum signal gain and saturated output power while minimizing noise figure, which will expand your test capabilities in systems, components manufacturing and characterizing as well as research and development. The compact turnkey benchtop or 19” Rackmount ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1563nm
Max Output Power: 13 dBm
Nominal Gain: 30 dB
Pre-Amp And Booster Specs: Check datasheet for details
Amonics & NICT (National Institute of Information and Communications technology, Japan) co-developed EDFAs are designed for transient suppression. The results are EDFAs that possess high output power, high gain with very low noise , low gain excursion and are ideal for Optical packet Switching (OPS) applications. The turnkey ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1537.37-1561.62nm
Max Output Power: 15 dBm
Nominal Gain: 18 dB
Amonics’ amplifiers incorporate unique design to produce maximum signal gain and saturated output power while minimizing noise figure, which will expand your test capabilities in systems, components manufacturing and characterizing as well as research and development. The compact turnkey benchtop or 19” Rackmount ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1563nm
Max Output Power: 18 dBm
Nominal Gain: 35 dB
Pre-Amp And Booster Specs: Check datasheet for details
Amonics’ amplifiers incorporate unique design to produce maximum signal gain and saturated output power while minimizing noise figure, which will expand your test capabilities in systems, components manufacturing and characterizing as well as research and development. The compact turnkey benchtop or 19” Rackmount ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1563nm
Max Output Power: 23 dBm
Nominal Gain: 40 dB
Pre-Amp And Booster Specs: Check datasheet for details
Amonics’ specialty products, C-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528-1567nm
Max Output Power: 22 dBm
Nominal Gain: 30 dB
Amonics’ specialty products, C-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1529-1563nm
Max Output Power: 22 dBm
Nominal Gain: 30 dB
Amonics\' specialty products, L-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1570-1620nm
Max Output Power: 22 dBm
Nominal Gain: 25 dB
Amonics\' specialty products, L-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1570-1603nm
Max Output Power: 22 dBm
Nominal Gain: 30 dB
FOA-M2300CDEFV1C-AA009 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1529.5-1563nm
Max Output Power: 19 dBm
Nominal Gain: 0.1 dB
FOA-M2200CBEFG1C-AA008 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1529-1563nm
Max Output Power: 20.8 dBm
Nominal Gain: 0.1 dB
FOA-M2200CBEFG1C-AA007 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528.77-1565nm
Max Output Power: 21 dBm
Nominal Gain: 0.1 dB
FOA-M2200CBEFG1C-AA006 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528.77-1565nm
Max Output Power: 21 dBm
Nominal Gain: 0.1 dB
FOA-M2200CBEFG1C-AA005 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1529-1563nm
Max Output Power: 20 dBm
Nominal Gain: 0.1 dB
FOA-M2200CBEFG1C-AA004 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528.77-1565nm
Max Output Power: 17 dBm
Nominal Gain: 0.1 dB
FOA-M2200CBEFG1C-AA003 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528.77-1564nm
Max Output Power: 17.4 dBm
Nominal Gain: 0.1 dB
FOA-M2200CBEFG1C-AA002 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1529-1563nm
Max Output Power: 17 dBm
Nominal Gain: 0.1 dB
FOA-M1500CBESC1C-AA011 Fixed Gain EDFA
Finisar Corporation
Finisar\'s 70x90 mm Fixed Gain (FG) EDFA product line supports a full range of C- or L-band fixed gain WDM EDFAs, as well as narrow band, CWDM and single channel EDFAs. The products support either cooled or uncooled pumps, thus allowing the optimal combination of size, power consumption and performance to be achieved for each ...

Specifications

Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1504.5-1517.5nm
Max Output Power: 13 dBm
Nominal Gain: 0.1 dB