FILTER PRODUCTS

to
to
to
to

Raman Amplifier Fiber Amplifiers

The MARS series of Raman Fiber Amplifiers have the well-designed built-in drive circuit and the logical control circuit. It can achieve high-performance output with carrier-grade pump laser and the stability of output power can be guaranteed by ATC and APC circuits. Connet provides the detection and the protective ...

Specifications

Amplifier Type: Raman Amplifier
Wavelength Range: 1528 – 1560 nm
Min Input Power: Not Specified
Max Output Power: 29 dBm
Nominal Gain: 12 dB
Fiber Raman amplifier uses the Raman effect in quartz fiber to provide gain to optical signals, and achieves high gain and low noise amplification of optical signals in the C or L band, which can effectively compensate for the attenuation of optical signals in long-distance optical fiber transmission. It can be used in long-distance ...

Specifications

Amplifier Type: Raman Amplifier
Wavelength Range: 1528 – 1650 nm
Max Output Power: 31.46 dBm
Nominal Gain: 0.2 dB
Highly efficiently multicascaded Raman lasers based on phosphosilicate fibers (P-doped) can be created at different wavelength. Raman shift by 1330 cm-1 in opposite to Ge-doped fibers is approximately three times larger.  Output emission spectrum of two-cascade 1.48 µm Raman fiber laser converter is presented in the ...

Specifications

Amplifier Type: Raman Amplifier
Wavelength Range: 1240 – 1484 nm
Max Output Power: Not Specified
Nominal Gain: Not Specified
Central Wavelength, Nm: 1240, 1270, 1484
Amonics Raman Amplifier is a high power pump laser source for distributed optical amplification of optical signals in the C or C+L band. The Raman Amplifier features 2 or 4 pumping wavelengths for gain flattened amplification. It is a ready-to-use optical amplifier equipped with a broadband pump & signal combiner and individual ...

Specifications

Amplifier Type: Raman Amplifier
Wavelength Range: 1400 – 1500 nm
Max Output Power: Not Specified
Nominal Gain: Not Specified
Total Pump Power: 300mW - 1200mW
Amonics’ specialist products, L-band Erbium-doped Fiber Amplifiers(EDFA), are made with high power pump laser and high stability pump combiners, robust in high power boosting. The result are EDFAs that possess high output power, high gain with very low noise, and are ideal for high power EDFA applications.The turnkey ...

Specifications

Amplifier Type: Raman Amplifier
Wavelength Range: 1570 – 1620 nm
Max Output Power: 27 dBm
Nominal Gain: Not Specified
Amonics Raman Amplifier Modules are high power laser light sources for distributed optical amplification of optical signals in the C or L bands. These modules feature 2 or 4 pumping wavelengths for gain flattened amplification. It is a ready-to-use optical amplifier equipped with a broadband pump/signal combiner and separate power ...

Specifications

Amplifier Type: Raman Amplifier
Wavelength Range: 1528 – 1605 nm
Max Output Power: Not Specified
Nominal Gain: 10 dB
On FindLight marketplace you will find 6 different Raman Amplifier Fiber Amplifiers from suppliers around the world. With just a few clicks you can compare different Raman Amplifier Fiber Amplifiers and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.