All Categories
Fiber Lasers

FILTER PRODUCTS

to
to
to
  1. Home
  2. Lasers
  3. Fiber Lasers
  4. Fiber Amplifiers
  5. SMF-28

SMF-28 Fiber Amplifiers

C-Band High Power Optical Fiber Amplifier
Connet Laser Technology Co., Ltd.
Add to watch list
C-Band High Power Optical Fiber Amplifier
Compare
The MARS series C-band high power optical fiber amplifiers of Connet Laser employ the high-power, high-performance multi-mode pump source inside and use the double cladding fiber amplifier technology and the integrated design of all-fiber structure. The output power can be 0.5~10W. MARS series optical fiber amplifier is an integral ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1575nm
Min Input Power: -3 dBm
Max Output Power: 40 dBm
Nominal Gain: 30 dB
Data Sheet
Inquire Price
C-Band Booster EDFA
Connet Laser Technology Co., Ltd.
Add to watch list
C-Band Booster EDFA
Compare
The MRAS series C-band booster Er-doped fiber amplifiers of Connet Laser are designed for amplifying single-mode or polarization signal of the single wavelength optical transmission system. The maximum output power is up to 23dBm. The MRAS series C-band booster Er-doped fiber amplifiers of Connet Laser adopt ACC and APP control ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528-1560nm
Min Input Power: -5 dBm
Max Output Power: 23 dBm
Nominal Gain: 20 dB
Data Sheet
Inquire Price
1550nm Erbium-Doped Fiber Amplifier EDFA RZ-M-C-23-20-FA-1.5
CSRayzer Optical Technology
Add to watch list
1550nm Erbium-Doped Fiber Amplifier EDFA RZ-M-C-23-20-FA-1.5
Compare
The module uses high-reliability devices and special optical design. Good craftsmanship ensures the reliability of the entire product. Through reasonable design layout and heat dissipation treatment, it ensures good operation under high and low temperature conditions. This product can be customized according to customer needs.

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1529-1564nm
Min Input Power: 3 dBm
Max Output Power: 23 dBm
Nominal Gain: 20 dB
Data Sheet
Inquire Price
High Power Erbium-ytterbium Co-doped Optical Amplifier RZ-C EYDFA-M-1550-3W-SM09-FC /APC-1m-X
CSRayzer Optical Technology
Add to watch list
High Power Erbium-ytterbium Co-doped Optical Amplifier RZ-C EYDFA-M-1550-3W-SM09-FC /APC-1m-X
Compare
CSRayzer's high power EYDFA  product has been widely used in CATV system and FTTH. High Power EYDFA uses  single mode laser and multi-mode pump laser to provide energy. The max high output power can reach up to 40dBm. The product can be configured in ACC or APC  work mode through GUI. Using the high realibility ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1540-1560nm
Min Input Power: -5 dBm
Max Output Power: 35 dBm
Nominal Gain: NUM dB
Data Sheet
Inquire Price
Single Channel Erbium-doped Fiber Pre-Amplifier for C-band
DK Photonics
Add to watch list
Single Channel Erbium-doped Fiber Pre-Amplifier for C-band
Compare
The erbium-doped fiber small signal amplifier, also known as a Pre-Amplifier (PA), is specifically engineered for amplifying weak optical signals ranging between -45dBm and -25dBm. It boasts a remarkable typical gain ranging from 35 dB to as high as 45 dB, coupled with a low noise figure to ensure minimal signal degradation. This ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1565nm
Min Input Power: -25 dBm
Max Output Power: 35 dBm
Nominal Gain: <0.3 dB
Data Sheet
Inquire Price
Conquer Optical Photonics Electro-Optic Modulator 10G/20G/40G Broadband Microwave Amplifier
Beijing Conquer Photonics Co., Ltd.
Add to watch list
Conquer Optical Photonics Electro-Optic Modulator 10G/20G/40G Broadband Microwave Amplifier
Compare
An optical amplifier is a device which receives some input signal light and generates an output signal with higher optical power. Typically, inputs and outputs are laser beams (very rarely other types of light beams), either propagating as Gaussian beams in free space or in a fiber. The amplification occurs in a so-called gain ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1525-1565nm
Min Input Power: -10 dBm
Max Output Power: 23 dBm
Nominal Gain: - dB
Data Sheet
Inquire Price
On FindLight marketplace you will find 7 different SMF-28 Fiber Amplifiers from suppliers around the world. With just a few clicks you can compare different SMF-28 Fiber Amplifiers and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.