Page 2 - Buy Fiber Optics & Laser Accessories | Best wholesale prices from suppliers, manufacturers and factories

Connet Laser Technology Co., Ltd. Sponsored

Compare

Connet high quality cladding power stripper has unique optical properties. This device can absorb the light transmitted in the inner cladding of the double-clad fiber. In double-clad fiber, all the light transmitted in the optical waveguide formed by the inner cladding with large numerical aperture (>/=0.46) and the ...

Specifications
Operating Wavelength:	1030-1080 nm
Input/output Fiber Type:	Nufern LMA-GDF-20/400-M
Numerical Aperture (NA):	0.065/0.46
Min. Stripping Rate:	>98%
Max. Stripping Power:	>200W or >50W depending on the model

Data Sheet

Inquire Price

20-40 GHz Intensity Modulators for Analog Applications AM20, AM40

GKER Photonics Sponsored

Add to watch list

Compare

The GKER Photonics 20-40 GHz Intensity Modulators (AM20 & AM40 Series) are designed for high-frequency analog applications, providing exceptional performance and reliability. Utilizing the Mach-Zehnder Interferometer (MZI) architecture, these modulators offer a unique combination of high linearity, low drive voltage, and a ...

Specifications
Operating Wavelength:	1525 - 1615 nm
Insertion Loss:	< 4.5 (3.5 typ) < 5.0 (4.0 typ) dB
Optical Return Loss:	> 45 dB
Polarization Extinction Ratio:	> 20 (23 typ) dB
S21 Electro-Optic Bandwidth:	> 20 (23 typ) GHz

Data Sheet

Inquire Price

Power Delivery Laser Cable

New Pion Fiber Tech Co.,Ltd

Add to watch list

Compare

Power Delivery Laser Cable D80 Laser Cable SMA-905 Laser Cable

Specifications
D80(Protection Tube Diameter:	8 mm
SM905(Protection Tube Diameter:	3-10 mm

Data Sheet

Inquire Price

Amonics - 10G Receiver Module

Amonics Limited

Add to watch list

Compare

Amonics’ PR10G 10Gbit/s ac-coupled photo-receiver integrates a high speed pin diode and a GaAs preamplifier to provide high performance. Featuring high transimpedance coupled with a nonquantizing limiting buffer output, it provides high gain while limiting the maximum output swing, simplifying the interface to subsequent ...

Specifications
Operation Wavelength Range:	1280nm-1580nm
Sensitivity:	>-18dB

Data Sheet

Inquire Price

Amonics - 10Gb Serial Bit Error Rate Tester

Amonics Limited

Add to watch list

Compare

ABERT-100 is an integrated Pseudo-random Bit Sequence (PRBS) generator and a Bit Error Rate receiver with a built-in module slot for either SFP+ or XFP transceivers. The PRBS outputs optical NRZ waveform with bit rate within 9.95-11.21 Gbps, with settable data pattern of 27-1, 223-1, 231-1, and a fixed 64-bit user defined pattern. An ...

Specifications
Data Rate:	9.95 - 11.32 Gb/s

Data Sheet

Inquire Price

Amonics - Optical Receiver

Amonics Limited

Add to watch list

Compare

This general purpose benchtop optical receiver is designed for high speed testing of optical network systems and components. The standard receiver unit can detect modulation frequency to 11.5GHz bandwidth. A built-in low noise pre-amp EDFA provides the required pre-amplification of incoming signal, before reaching photoreceiver. ...

Specifications
Data Rate:	155Mb/s to 11Gb/s
Input Power Level:	-12dBm to -3dBm
Wavelength:	1290nm to 1565nm

Data Sheet

Inquire Price

Amonics - Lightwave Converter

Amonics Limited

Add to watch list

Compare

The Lightwave Converter is a high performance integrated lightwave transmitter for building turnkey digital and analog optical transmission system. By combining a high power laser, broadband lithium Niobate external modulator and high speed RF driver, the transmitter can be used for testing or virtually any kind of optical network, ...

Specifications
Modulation Bandwidth:	5 kHz to 10 GHz
Max Optical Input Power:	500 mW

Data Sheet

Inquire Price

Fiber Lasers

No parameters available.

Page 2 - Fiber Optics & Laser Accessories

Specifications

Specifications

Specifications

Specifications

Specifications

Specifications

Specifications