All Categories
Fiber Lasers

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Lasers
  3. Fiber Lasers

Page 3 - Fiber Lasers

C-Band High Power Optical Fiber Amplifier
Connet Laser Technology Co., Ltd.
Add to watch list
C-Band High Power Optical Fiber Amplifier
The MARS series C-band high power optical fiber amplifiers of Connet Laser employ the high-power, high-performance multi-mode pump source inside and use the double cladding fiber amplifier technology and the integrated design of all-fiber structure. The output power can be 0.5~10W. MARS series optical fiber amplifier is an integral ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1575nm
Min Input Power: -3 dBm
Max Output Power: 40 dBm
Nominal Gain: 30 dB
...
Data Sheet
C-Band Low Noise PreAmp EDFA Module
Connet Laser Technology Co., Ltd.
Add to watch list
C-Band Low Noise PreAmp EDFA Module
The MARS series C-band PreAmp EDFA module of Connet is the high-gain, low-noise fiber preamplifier (Pre-EDFA). This amplifier is used to pre-amplify the small signal (down to - 40dBm), improve the receiver sensitivity and extend the transmission distance of the signal. This series of amplifiers employ the optimized Erbium-doped ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528-1560nm
Min Input Power: dBm
Max Output Power: 10 dBm
Nominal Gain: 50 dB
...
Data Sheet
C-Band Booster EDFA
Connet Laser Technology Co., Ltd.
Add to watch list
C-Band Booster EDFA
The MRAS series C-band booster Er-doped fiber amplifiers of Connet Laser are designed for amplifying single-mode or polarization signal of the single wavelength optical transmission system. The maximum output power is up to 23dBm. The MRAS series C-band booster Er-doped fiber amplifiers of Connet Laser adopt ACC and APP control ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1528-1560nm
Min Input Power: -5 dBm
Max Output Power: 23 dBm
Nominal Gain: 20 dB
...
Data Sheet
1.0um High Power Pulse Fiber Amplifier
Connet Laser Technology Co., Ltd.
Add to watch list
1.0um High Power Pulse Fiber Amplifier
The MARS series 1.0um high power pulse fiber amplifiers of Connet Laser are specially designed for short pulse (<50ns) amplification. These amplifiers employ the optimized double cladding fiber amplification technology. Therefore, they can guarantee the maximum optical-optical conversion efficiency and the minimum nonlinear ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1035-1083nm
Min Input Power: dBm
Max Output Power: 37 dBm
Nominal Gain: 30 dB
...
Data Sheet
VENUS Series 1um Single-mode CW Fiber Laser
Connet Laser Technology Co., Ltd.
Add to watch list
VENUS Series 1um Single-mode CW Fiber Laser
The 1.0um single-mode CW fiber laser of Connet Laser is a highly integrated continuous Yb-doped fiber laser system with high power output. This fiber laser employs the integrated design of all-fiber structure and use the double cladding fiber pumping technology to realize the high performance output laser. The output power can be up ...

Specifications
Center Wavelength: 1040~1097 nm
Output Power: 50 W
Output Mode:
Beam Quality (M^2): <1.3
Spectral Linewidth: < 1 nm
...
Data Sheet
1535nm 1kW Automotive LiDAR Source
Lumimetric
Add to watch list
1535nm 1kW Automotive LiDAR Source
Mini Pulse Fiber Laser for LiDAR (1.5μm/1kW Mini Pulse Fiber Laser for LiDAR) is one of the most compact LiDAR light sources in the industry with optimized power consumption and the most compact structure under the prerequisite of guaranteeing the power required for ranging. It is suitable for airborne remote sensing and mapping, ...

Specifications
Wavelength: 1535 nm
Average Output Power: 1000 W
Pulse Duration: 3-3ns
Beam Quality (M^2): 1
Max Pulse Repetition Rate: 500 kHz
...
Data Sheet
1570nm Fiber Laser
DK Photonics
Add to watch list
1570nm Fiber Laser
1570nm fiber laser light source adopts DFB semiconductor laser chip, single-mode optical fiber output, professionally designed driving circuit and TEC control to ensure laser safety and stability, which can provide desktop or modular packaging.

Specifications
Center Wavelength: 1570 nm
Output Power: 5 W
Output Mode:
Beam Quality (M^2): --
Spectral Linewidth: 0.1 nm
...
Data Sheet
BIOLIT 2 Femtosecond fiber laser for biophotonics
Litilit
Add to watch list
BIOLIT 2 Femtosecond fiber laser for biophotonics
The Biolit 2 is a compact, air-cooled femtosecond laser designed formultiphoton microscopy, biophotonics and other non-linear optics applications. The industrial-grade device is exceptionally robust, maintenance-free andaffordable. A combination of ultra short (typ 55 fs) and clean pulses withintegrated dispersion compensation, ...

Specifications
Wavelength: 1050 nm
Repetition Rate: 15 – 40 MHz
Output Power: 2 W
Pulse Duration: 70 fs
Pulse Strehl Ratio: > 0.9
...
Data Sheet
1550nm Pulsed Erbium Fiber Laser
Lumimetric
Add to watch list
1550nm Pulsed Erbium Fiber Laser
The LiDAR Source is a 1550nm “eye-safe”, single mode nanosecond-pulsed Erbium fiber laser. Based on the Master Oscillator Power Amplifier (MOPA) configuration and optimized design of multi-staged optical amplification, it can reach high peak power and ns pulse width output. It is a versatile, ready-to-use, and durable ...

Specifications
Wavelength: 1550 nm
Average Output Power: 750 W
Pulse Duration: 1-10ns
Beam Quality (M^2): 1
Max Pulse Repetition Rate: 2000 kHz
...
Data Sheet
Rof Electro-optic modulator EDFA Optical Amplifier Erbium Doped Fiber Amplifier YDFA Amplifier
Beijing Rofea Optoelectronics Co,. Ltd.
Add to watch list
Rof Electro-optic modulator EDFA Optical Amplifier Erbium Doped Fiber Amplifier YDFA Amplifier
An optical amplifier is a device which receives some input signal light and generates an output signal with higher optical power. Typically, inputs and outputs are laser beams (very rarely other types of light beams), either propagating as Gaussian beams in free space or in a fiber. The amplification occurs in a so-called gain ...

Specifications
Amplifier Type: Not Specified
Wavelength Range: 1525-1565nm
Min Input Power: -3 dBm
Max Output Power: -40 dBm
Nominal Gain: - dB
...
Data Sheet
Thulium Fiber Laser 1940nm IR Solid State Laser Device for Salon Laser Equipments
BeamQUS Inc.
Add to watch list
Thulium Fiber Laser 1940nm IR Solid State Laser Device for Salon Laser Equipments
30W Thulium Fiber Laser 1940nm IR Solid State Laser Device for Salon Laser Equipment

Specifications
Center Wavelength: 1940 nm
Output Power: 30 W
Output Mode: Continuous Wave (CW)
Beam Quality (M^2): 1.2
Spectral Linewidth: 1 nm
...
Data Sheet
DK Photonics C band ASE Broadband Light Source
DK Photonics
Add to watch list
DK Photonics C band ASE Broadband Light Source
The C Band ASE Broadband Light Source stands out with its advanced erbium-doped optical fiber spectral flatness technology, ensuring a consistent and high-quality output. With a focus on optimal performance, this light source boasts a high output power, making it particularly effective for a wide range of applications within the ...

Specifications
Bandwidth: 35 nm
Center Wavelength: 1545.5 nm
Output Power: 100 mW
Polarization: Linear
Output Power Options: 10/20/50/100 mW
...
Data Sheet
Single Channel Erbium-doped Fiber In-Line Amplifier for C-band
DK Photonics
Add to watch list
Single Channel Erbium-doped Fiber In-Line Amplifier for C-band
Introducing our Erbium-doped Fiber Line Amplifier, a cutting-edge optical power amplifier meticulously designed for superior performance in fiber laser and fiber communication systems. This advanced In-Line Amplifier, also known as a Line Amplifier (LA), seamlessly integrates the strengths of both Pre-Amplifiers (PA) and Booster ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1565nm
Min Input Power: - dBm
Max Output Power: 26 dBm
Nominal Gain: <0.5 dB
...
Data Sheet
C-band Tunable Fiber Laser
DK Photonics
Add to watch list
C-band Tunable Fiber Laser
The C-band Tunable Fiber Laser 's wavelength tuning range covers the C-bandand achieves continuous laser output of up to 89 wavelengths (ITU-Tstandard wavelength, wavelength separation 50 GHz). It integrates dual FPcavity tuning etalon and high gain chip, featuring high output optical power,narrow linewidth and high wavelength ...

Specifications
Bandwidth: 35 nm
Center Wavelength: 1546 nm
Output Power: 10/20 mW
Polarization: Not Specified
Frequency Tuning Range: 191.7~196.1 THz
...
Data Sheet
2000nm Band ASE Broadband Light Source
DK Photonics
Add to watch list
2000nm Band ASE Broadband Light Source
The 2000nm band ASE broadband light source is based on thulium fiber laser technology, has a high output power, and the spectrum covers 1850~2000nm, which is suitable for laser biology, spectrum measurement and other applications. Can provide communication interface and host computer software to facilitate the monitoring of the state ...

Specifications
Bandwidth: 150 nm
Center Wavelength: 2000 nm
Output Power: 10/20/30 mW
Polarization: Not Specified
Short-term Stability (15 Minutes): ≤ ±0.02 dB
...
Data Sheet
1060nm ASE Broadband Light Source
DK Photonics
Add to watch list
1060nm ASE Broadband Light Source
1060nm ASE Broadband Light Source is based on ytterbium-doped fiber and high-performance pump laser. The ASE spectrum covers 1030-1080nm, and the light source structure is optimized, and it has higher output power and better flatness. Can be used for fiber optic device testing, FBG grating production, etc.

Specifications
Bandwidth: 50 nm
Center Wavelength: 1060 nm
Output Power: 10/20/30 mW
Polarization: Not Specified
Data Sheet
1550nm Fiber Laser (High power)
DK Photonics
Add to watch list
1550nm Fiber Laser (High power)
1550nm fiber laser light source adopts DFB semiconductor laser chip, singlemode optical fiber output, professionally designed driving circuit and TEC control to ensure laser safety and stability, which can provide desktop or modular packaging.

Specifications
Center Wavelength: 1550 nm
Output Power: 15 W
Beam Quality (M^2): --
Spectrum Linewidth: ≤ 0.1 nm
Sideband Rejection Ratio: > 50 dB
...
Data Sheet
1450nm Raman Amplifier Pump Laser
DK Photonics
Add to watch list
1450nm Raman Amplifier Pump Laser
The single-mode fiber output 1450 nm band semiconductor laser light source uses high-performance butterfly semiconductor lasers, and uses professionally designed drive circuits and TEC control to ensure safe and stable laser operation. It is suitable as the pump light source of the fiber Raman amplifier, and can be provided in a ...

Specifications
Center Wavelength: 1450 nm
Output Power: 0.5 W
Output Mode:
Beam Quality (M^2): --
Spectral Linewidth: nm
...
Data Sheet
1030/1064/1070nm Fiber Laser
DK Photonics
Add to watch list
1030/1064/1070nm Fiber Laser
1030/1064/1070nm Fiber Laser adopt butterfly-shaped semiconductor laser chip, professionally designed drive circuit and TEC control to ensure the safe operation of the laser, stable output power and spectrum. It is suitable as a seed laser for high-power lasers, and can also be used for production testing of 1064nm wavelength optical ...

Specifications
Center Wavelength: 1064 nm
Output Power: 0.5 W
Beam Quality (M^2): --
Spectral Width: < 0.1 nm
Output Power Options (Standard): 100/200/300/400/500 mW
...
Data Sheet
974/976nm Pump Laser
DK Photonics
Add to watch list
974/976nm Pump Laser
The 974/976nm single-wavelength laser adopts a butterfly-shaped semiconductor laser chip with fiber FBG frequency locking. The professionally designed drive circuit and TEC control ensure the safe operation of the laser, and the output power and spectrum are stable. It is suitable as a pump laser source for fiber lasers or fiber ...

Specifications
Center Wavelength: 974 nm
Output Power: 1 W
Beam Quality (M^2): --
Output Power Options: 200/400/600/1000 mW
Short-term Stability (15 Minutes): ≤ ±0.02 dB
...
Data Sheet
1480nm Fiber Laser
DK Photonics
Add to watch list
1480nm Fiber Laser
The 1480nm single-wavelength laser adopts high-performance butterfly semiconductor laser chip, professionally designed drive circuit and TEC control to ensure the safe operation of the laser, stable output power and spectrum. It is suitable as a pump laser source for fiber lasers or EDFA fiber amplifiers, and can be provided in a ...

Specifications
Center Wavelength: 1480 nm
Output Power: 0.8 W
Output Mode: Continuous Wave (CW)
Beam Quality (M^2): --
Spectral Linewidth: -- nm
...
Data Sheet
1310nm Fiber Laser
DK Photonics
Add to watch list
1310nm Fiber Laser
1310nm fiber laser light source adopts DFB semiconductor laser chip, singlemode optical fiber output, professionally designed driving circuit and TEC control to ensure laser safety and stability, which can provide desktop or modular packaging.

Specifications
Center Wavelength: 1310 nm
Output Power: 0.02 W
Beam Quality (M^2): --
Output Power Options: 10/20 mW
Spectrum Linewidth: ≤ 3 MHz
...
Data Sheet
Polarization Maintaining Erbium-doped Fiber Amplifier for C-band
DK Photonics
Add to watch list
Polarization Maintaining Erbium-doped Fiber Amplifier for C-band
Polarization-maintaining erbium-doped fiber amplifier (EDFA-PM) is a series of fiber amplifier products dedicated to polarization-maintaining fiber systems. It has the advantages of full polarization-maintaining, high gain, and high power. It supports host computer software control, and is compact and easy to integrate. Customers ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1565nm
Max Output Power: 14 dBm
Nominal Gain: 5 dB
Data Sheet
Pulsed Erbium-doped Fiber Amplifier for C-band
DK Photonics
Add to watch list
Pulsed Erbium-doped Fiber Amplifier for C-band
Pulsed Erbium-doped Fiber Amplifier for C-band is a series of fiber amplifier products dedicated to picosecond and nanosecond laser pulses. It outputs high peak power laser pulses while minimizing fiber nonlinear effects. It has the advantages of high gain and low noise. Supports PC software control, compact size and easy ...

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1565nm
Max Output Power: 60 dBm
Nominal Gain: 3 dB
Data Sheet
Single Channel Erbium-doped Fiber Booster Amplifier for C-band
DK Photonics
Add to watch list
Single Channel Erbium-doped Fiber Booster Amplifier for C-band
Erbium-doped fiber power amplifier (BA, Booster-Amplifier) is usually used to increase the power of optical signals in the range of -6dBm~+3dBm or higher, with a maximum saturation power of 26dBm, which is usually used to increase the emission power of laser light sources.

Specifications
Amplifier Type: EDFA - Erbium-Doped Fiber Amplifier
Wavelength Range: 1530-1565nm
Max Output Power: 26 dBm
Nominal Gain: 3 dB
Data Sheet