HyperRapid NX SmartCleave 1064-50 High Power Industrial Picosecond Laser
Description
HyperRapid NX SmartCleave is an industrial high-power picosecond laser that is specifically optimized for high-speed and high-quality cutting of transparent and brittle materials. Using the Coherent patented SmartCleave technology, HyperRapid NX delivers kerf-less cutting on arbitrarily curved outer or inner contours. HyperRapid NX SmartCleave features 1 millijoule burst energy to cut thick substrate in a single pass with sub-micron edge roughness, therefore enabling new applications in the automotive and consumer electronics markets. The 50 W average power model is optimal for cost-sensitive applications, while the 100 W version enables high speed applications up to 2 m/s.
HyperRapid NX SmartCleave 1064-50 High Power Industrial Picosecond Laser
Specifications |
|
|---|---|
| Wavelength: | 1064 nm |
| Repetition Rate: | 1 MHz |
| Output Power: | 50 W |
| Pulse Duration: | 15000 fs |
Features
1064 nm output
100 W power to enable high throughput
Over 1000 μJ burst energy to cut thicker samples
Specified burst mode operation for repeatable performance in volume manufacturing
Compact and light weight, same interfacing as standard HyperRapid NX to allow straightforward integration
Right of use to the Coherent SmartCleave IP is included
Applications
Cutting of strengthened and unstrengthened glass, sapphire, and ceramics
Scribing and drilling of glass, sapphire, ceramics, and composite materials
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Coherent Page to edit and add data
Frequently Asked Questions
The HyperRapid NX SmartCleave laser is specifically optimized for high-speed and high-quality cutting of transparent and brittle materials such as strengthened and unstrengthened glass, sapphire, and ceramics.
The HyperRapid NX SmartCleave laser features over 1000 μJ burst energy to cut thicker samples in a single pass with sub-micron edge roughness.
The HyperRapid NX SmartCleave laser comes in two models: the 50 W average power model and the 100 W version, which enables high speed applications up to 2 m/s.
The beam quality parameter of the HyperRapid NX SmartCleave laser is ≤1.3.
The warm-up time of the HyperRapid NX SmartCleave laser from chiller start is less than 45 minutes.