No parameters available.

Page 6 - Semiconductor Laser Accessories

M02096 2.5 Gbps 3.3/5 V Laser Driver/Limiting Amplifier
Macom
The M02095 and M02096 are integrated laser drivers and limiting amplifiers for applications from 622 Mbps to 1.25 Gbps for the M02095 and up to 4.3 Gbps for the M02096. The laser driver modulation output can be AC or DC-coupled to an FP/DFB laser. The devices can operate from a 3.3 V or 5 V supply. The devices include monitors for ...

Specifications

M02068 622 Mbps 3.3 V Laser Driver
Macom
The M02068 is a highly integrated, programmable laser driver intended for telecom applications up to 622 Mbps. Using differential PECL data and clock inputs, the M02068 supplies the bias and modulation current for driving an edge-emitting laser. The modulation output can be DC coupled to the laser diode, giving a significant power ...

Specifications

M02066 3 Gbps 3.3V Laser Driver
Macom
The M02066 is a highly integrated, programmable laser driver intended for short-reach SONET/SDH applications. Using differential PECL data and clock inputs, the M02066 supplies the bias and modulation current for driving an edge-emitting laser. The modulation output can be DC coupled to the laser diode, giving a significant power ...

Specifications

M02061 4.3 Gbps, 3.3 Or 5V Laser Driver
Macom
Up to 4 Gbps SFF/SFP Laser Driver in 4X4 MLF Package The M02061 is a highly integrated, programmable laser driver intended for SFP/SFF module applications to 4.25 Gbps. Using differential PECL data and clock inputs, the M02061 supplies the bias and modulation current required to drive an edge-emitting laser. The M02061 includes ...

Specifications

MALD-37031A 28 Gbps Multi-Rate Laser Driver
Macom
28 Gbps Multi-Rate Laser Driver with Limiting Amplifier, Dual CDRs, Power Management, and Diagnostics.

Specifications

MALD-37030A 28 Gbps Multi-Rate Laser Driver
Macom
28 Gbps Multi-Rate Laser Driver with Limiting Amplifier, Dual CDRs, Power Management, and Diagnostics.

Specifications

MALD-02101C Laser Driver
Macom
The MALD-02101 is pin compatible with the M02099 device. A new Dual Closed Loop supporting a wide dynamic MPD input current range, enhanced ER stability over operating conditions and pattern dependency immunity. Also includes a programmable eye shaping network to enhance Tx eye quality.

Specifications

MALD-37345B Quad 28G VCSEL Driver
Macom
The MALD-37345 is a quad 28G VCSEL driver with integrated adaptive input equalizer for use as a complete one chip transmit solution in optical modules. The outputs are spaced on 250 µm centers to be compatible with standard optical interfaces. Each channel can be controlled through the 2-wire serial interface and includes a ...

Specifications

MALD-38435 Quad 28GBaud PAM4/NRZ VCSEL Driver
Macom
The MALD-38435 is a four channel 28GBaud PAM4/NRZ linear VCSEL Driver designed to modulate VCSELs in transmit path of optical modules. The outputs are spaced on 250 μm centers to be compatible with standard optical interfaces. The device provides a two-wire serial interface which allows digital programmable control of bias and ...

Specifications

MALD-02079C 3.1 Gbps Low Power Dual Closed Loop Laser Driver
Macom
The MALD-02079/MALD-02080 is pin compatible with the M02076 and M02077 devices. A new Dual Closed Loop supporting a wide dynamic MPD input current range, enhanced ER stability over operating conditions and pattern dependency immunity. The MALD-02079/MALD-02080 is a low power, highly integrated laser driver and continuous mode ...

Specifications

MAOM-002311 Single Channel Linear 28 Gbps Directly Modulated Laser Driver
Macom
The MAOM-002311 is a high performance single channel Directly Modulated Laser (DML) driver for 50G, 100G and 200G applications using 28 Gbaud PAM4 modulation. The device is driven with a nominal differential input signal of 800 mVppd and provides an output current that can be controlled from 28 mApp to 57 mApp. The DML driver has ...

Specifications

OPI PHOTONICS LASER BEAM OPTICS
OPI Photonics
OPI laser beam optics are divided in two main categories: focusing lenses to focus the collimated beam, and protective windows to protect the optical element from dust particles. The sliding protective window can be quickly removed and cleaned or replaced without disassembling the optical chain.

Specifications

The CW14pinButterflyDriver is a board level constant current laser diode driver and thermoelectric cooler (TEC) controller. It offers overshoot-free fast settling PID control, and protection against reverse or over voltage. Temperature and current limit is set by onboard trimmers. The operation current and temperature can be set via ...

Specifications

The Pulse Delay Generator offers several operating modes including pulse generator, frequency divider, burst andpulse picker. This unit generates accurate pulses with a repetition rate up to 20 MHz, variable pulse widths from 5 ns to 2^62 ns and pulse delays from 10 ps to 2^62 ns. Output levels are adjustable between 1 V, 3.3 V and 5 ...

Specifications

RMS Jitter: 80 ps
Delay Resolution: 10 ps
Min Input Voltage: 30 mV
Standalone Generator: 20 MHz
Voltage Level Converter: 150 MHz
The advanced and reliable circuitry of the TC LAB Series instruments achieve better than 0.0009°C temperature stability. The ultra-stable temperature controller instruments are particularly reliable for research in electro-optical, medical, spectroscopy, and defense systems wherever precision temperature ...

Specifications

The FL500 is ideal for driving low power laser diodes. It operates from 3 to 12 V, so is compatible with Li+ battery operation. It can be configured as two totally independent 250 mA drivers or a single 500 mA driver. Compatible with Type A or B laser diodes. The FL500 allows for quick and easy ...

Specifications

Supply Range: 3 - 12 V
Noise Level: 3 uA RMS at full scale
Compact all-in-one unit for driving/controlling Laser Diodes, SLEDs and SOAs  

Specifications

MTP1000 with LaserBlade, VOABlade, PowerBlade & SwitchBlade Providing you with unsurpassed versatility, unrivalled stability & uniformity in performance. Coherent Solutions’ MTP1000 holds up to 9 Blades in one single unit and you can control multiple MTP1000 units from a single computer through one intuitive controller ...

Specifications

The is an electronic module designed for driving diode lasers with up to 500mA low noise current.   For more details or for quotation email: yan.yan@analogti.com

Specifications