213nm UV Solid State Laser Source Picosecond pulsed DPS-213-PICO
Description
DIODE PUMPED ALL-SOLID-STATE PICOSECOND PULSED LASER Diode pumped all solid state picosecond pulsed laser at 213nm has the features of short pulse duration, high repetition rate and high average power, which is widely used in scientific research, fluorescence lifetime measurement and so on.
213nm UV Solid State Laser Source Picosecond pulsed DPS-213-PICO
Wavelength (nm) 213+-1
Operating mode Pulsed
Output power (mW) 10 30
Power stability (rms, over 4 hours) <1%,<3%
Pulse width (ps) <50
Beam divergence, full angle (mrad) <3
Beam diameter (mm) ~2
Repetition frequency (MHz) 5
Beam height from base plate (mm) 128
Cooled method Air cooled
Warm-up time (minutes) <15
Operating temperature (C) 15~30
Power supply (AC 220V) PSU-DPS-Pico
Expected lifetime (hours) 10000
Warranty 1 year
213nm UV Solid State Laser Source Picosecond pulsed DPS-213-PICO
Specifications |
|
---|---|
Avg. Power: | 0.01 W |
Wavelength: | 213 nm |
Repetition Rate: | 5-6kHz |
Spatial Mode (M^2): | 1 |
Pulse Duration: | 0.05 ns |
Pulse-to-Pulse Stability (RMS): | 3 % |
Cooling: | Air |
Features
DIODE PUMPED ALL-SOLID-STATE PICOSECOND PULSED LASER Diode pumped all solid state picosecond pulsed laser at 213nm has the features of short pulse duration, high repetition rate and high average power, which is widely used in scientific research, fluorescence lifetime measurement and so on.
Applications
scientific research, fluorescence lifetime measurement
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2021
Frequently Asked Questions
The operating mode of the DPS-213-PICO laser is pulsed.
The DPS-213-PICO laser has an output power range of 10-30mW.
The expected lifetime of the DPS-213-PICO laser is 10,000 hours.
The DPS-213-PICO laser is air cooled.
The DPS-213-PICO laser comes with a 1-year warranty.