IQFROG 1.5 μm The User-Friendly Optical Pulse Analyzer
Description
The IQFROG measures pulse intensity and phase in both spectral and temporal domains, yielding a complete pulse characterization. With its long delay arm and high resolution spectrometer, it measures chirped pulses up to 50 ps wide, or up to 10 ps wide if transform limited. Making it a perfect fit for C-band femtosecond and picosecond pulsed fiber lasers.
IQFROG 1.5 μm The User-Friendly Optical Pulse Analyzer
Specifications |
|
|---|---|
| Device Type: | FROG |
| Measurable Pulse Width: | 300-10,000fs |
| Wavelength Range: | 1520-1610nm |
| Input Polarization: | Any |
| Input Pulse Temporal FWHM: | 0.3 - 10 ps |
| Temporal Scan Range: | 200 ps |
| Temporal Resolution: | 15 fs |
| Input Pulse Spectral FWHM: | 0.2 - 10 nm |
| Spectral Resolution: | 120 pm |
| Pulse Repetition Rate: | Independent |
| Input RF Clock Required: | No |
| Input Connector Type: | FC/APC or FC/PC |
| Input Peak Power (saturation): | 7 W2 |
| Input Peak Power (sensitivity)c: | 0.005 W2 |
Features
- 1520 - 1610 nm input pulse wavelength range
- Perfect for C & L band fiber lasers
- Intensity & phase measurement for pulses 300 fs to 50 ps long
- Autocorrelation measurement up to 50 ps pulses
- Connectorized optical input
- Software driven automated operation
- Dedicated software for measurement and recovery
Applications
- Use the IQFROG to obtain the complete expression of electric field of your optical pulse, so that it can be used in numerical simulations
- Characterize and optimize the optical pulses generated from lasers such as, Erbium Doped Fiber Laser, Gain switched laser, Saturable Absorber mode-locked laser and externally modulated pulse source
- Generate transform-limited pulses by compensating for the chirp measured using IQFROG
- Generate optical pulses with desired intensity and chirp profiles using an arbitrary optical filter and check the results with an IQFROG
- Device characterization using comparative measurements of input and output pulses
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
New Zealand
-
Sold by:
-
On FindLight:
since 2015
Frequently Asked Questions
The IQFROG has a built-in high-resolution spectrometer to enable measurement of transform limited pulses of up to 10 ps width, or broader if the pulse has a frequency chirp.
Yes, the IQFROG is one of the few pulse analyzers on the market which can measure broad picosecond pulses up to 50 ps long, as well as short pulses down to 300 fs width.
The IQFROG uses a long mechanical translation stage to provide up to 200 ps of scan range to allow autocorrelation measurement of up to 50 ps long pulses.
The IQFROG is a perfect fit for C-band femtosecond and picosecond pulsed fiber lasers.
The IQFROG has a wavelength range of 1520 - 1610 nm for input pulses.