Page 2 - Pulse Diagnostics

VideoFROG Scan Software
Mesa Photonics LLC
For ultrafast laser pulse measurement systems, the software is just as important as the hardware. VideoFROG Scan is the premier real-time FROG pulse measurement software available. It is easy to use, but still has all the features you need to make sure that your system is operating perfectly, and allows the FROG Scan to be interfaced ...

Specifications

Device Type: FROG
Measurable Pulse Width: 1-1fs
Wavelength Range: 1-1nm
Input Polarization: Horizontal
The FC Spider (Few Cycle Spider) by APE provides spectral and temporal characterization of ultrashort laser pulses down to below 5 fs. It covers both the red and near infrared range, and visible wavelength region with the FC Spider VIS. This high-precision tool is ideal for aligning and monitoring the performance of broadband ...

Specifications

Device Type: SPIDER
Measurable Pulse Width: 5-200fs
Wavelength Range: 550-1050nm
Input Polarization: Horizontal
The Compact LX Spider by APE is a portable, compact and robust instrument for spectral and temporal characterization of femtosecond laser pulses. It is the ideal candidate for Ti:Sa laser applications and other ultrashort pulse oscillators or amplifiers in the wavelength range 750 – 900 nm. Two interchangeable Optics Sets are ...

Specifications

Device Type: SPIDER
Measurable Pulse Width: 16-300fs
Wavelength Range: 750-900nm
Input Polarization: Any
The IQFROG measures pulse intensity and phase in both spectral and temporal domains, yielding a complete pulse characterization. With its long delay arm and high resolution spectrometer, it measures chirped pulses up to 50 ps wide, or up to 10 ps wide if transform limited. Making it a perfect fit for C-band femtosecond ...

Specifications

Device Type: FROG
Measurable Pulse Width: 300-10,000fs
Wavelength Range: 1520-1610nm
Input Polarization: Any
Input Pulse Temporal FWHM: 0.3 - 10 ps
As a FROG device, GRENOUILLE yields the pulse intensity and phase vs. time and spectrum and spectral phase with great accuracy and reliability, requiring no assumptions about the pulse. It measures the actual pulse, not the coherent artifact. In addition,  GRENOUILLE also measures the beam spatial profile. What’s more, ...

Specifications

Device Type: FROG
Measurable Pulse Width: 4-500fs
Wavelength Range: 700-1100nm
Input Polarization: Any
The IQFROG measures pulse intensity and phase in both spectral and temporal domains, yielding a complete pulse characterization. With its long delay arm and high resolution spectrometer, it measures chirped pulses up to 50 ps wide, or up to 7.5 ps wide if transform limited. Making it a perfect fit for seed laser pulses ...

Specifications

Device Type: FROG
Measurable Pulse Width: 300-10,000fs
Wavelength Range: 1000 -1610nm
Input Polarization: Any
Recovery Technique: Frequency Resolved Optical Gating (FROG)
The new third-order cross-correlator specifically developed for measuring a wide array of output parameters from ultrafast laser system including: contrast ratio of laser pulses, determining pulse pedestal, pre-, post-pulses, and amplified spontaneous emission in femtosecond systems. It also provides information about the third-order ...

Specifications

Device Type: Autocorrelator
Measurable Pulse Width: 20-1000fs
Wavelength Range: 700-1500nm
Input Polarization: Horizontal
Temporal Range: 950 ps
How  good  is  the  output  from  your  femtosecond laser? The  new  third-order  cross-correlator  was specifically  developed  for  measuring  a  wide  array of output parameters from ultrafast laser systems including: contrast ...

Specifications

Device Type: Autocorrelator
Measurable Pulse Width: 20-20000fs
Wavelength Range: 800-1250nm
Input Polarization: Horizontal
Input Pulse Repetition Rate: < 3 kHz
The IRA-3-10 autocorrelator is specifically  developed for measuring pulse duration and near contrast ratio of IR ultrafast radiation (wavelength 3–10 μm) that is usually generated by the ultrafast OPAs.The IRA includes optomechanical  assembly and electronics with USB interface. System is easy to ...

Specifications

Device Type: Autocorrelator
Measurable Pulse Width: 30-50000fs
Wavelength Range: 3000-10000nm
Input Polarization: Horizontal, Vertical
Input Pulse Energy, μJ: < 10 uJ
The Reef-RTD real-time autocorrelator offers smooth and fast measurement of femtosecond and picosecond pulse duration. Different models of the autocorrelator cover several wavelength ranges, with the Reef-RTDM model combining the ranges by using 3 interchangeable photodetectors and optics. Two separate ranges can also be covered upon ...

Specifications

Device Type: Autocorrelator
Measurable Pulse Width: 10-6000fs
Wavelength Range: 1300-2000nm
Input Polarization: Horizontal, Vertical
PC Connection: USB
The Reef-RTD real-time autocorrelator offers smooth and fast measurement of femtosecond and picosecond pulse duration. Different models of the autocorrelator cover several wavelength ranges, with the Reef-RTDM model combining the ranges by using 3 interchangeable photodetectors and optics. Two separate ranges can also be covered upon ...

Specifications

Device Type: Autocorrelator
Measurable Pulse Width: 10-6000fs
Wavelength Range: 450-2000nm
Input Polarization: Horizontal
PC Connection: USB
REEF scanning autocorrelator by Del Mar Photonics. The Reef-RTD real-time autocorrelator offers smooth and fast measurement of femtosecond and picosecond pulse duration. Different models of the autocorrelator cover several wavelength ranges, with the Reef-RTDM model combining the ranges by using 3 interchangeable photodetectors and ...

Specifications

Device Type: Autocorrelator
Measurable Pulse Width: 10-6000fs
Wavelength Range: 450-2000nm
Input Polarization: Horizontal, Vertical
Input Repetition Rate: 8 kHz