LAS-UP-VIS
Description
The LAS-UP-VIS™ is a 0.5m-sized, non-contact lens alignment and inspection station designed from the ground-up for precision lens centration and tilt measurements of single element, doublet, triplet and multi-element lens assemblies with radius ranging from +/- 1 mm to infinity (plano) and diameters from below 1 mm to 600 mm, including spherical, aspheric, cylindrical and parabolic surfaces. All this can be done with a single objective lens allowing for fast and easy measurement. The core measurement technology is based on focused laser reflection (see LAS Technology). A single-mode optical fiber couples the external Laser Generation Module (LGM) to the on-tool vertically-mounted Optical Module (OM) which houses the focusing optics and large-format array camera(s). Software control of the LGM permits fast switching of wavelengths and optimization of the beam power, resulting in superior imaging of the reflected beam with sub-micron measurement precision. The design of the LGM permits up to two of three visible wavelengths (blue, green & red).
LAS-UP-VIS
Specifications |
|
|---|---|
| Vertical Focusing Range: | 2000 mm |
| Measurement Resolution: | 0.1-0.1um |
Applications
Centering of single lenses
Cementing lens doublets & triplets
Centering & bonding of multi-element lens assemblies
Alignment Inspection of multi-lens assemblies (requires CalcuLens™ Inspection)
Measurement of lens vertex height and air gaps (requires CalcuLens™ Vertex)
Measurement of lens Radius of Curvature (requires CalcuLens™ ROC)
Measurement of lens and assembly beam deviation (requires CalcuLens™ BD)
TIR profiling of rotationally symmetric housings and cells (requires CalcuSurf-1D™)
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Opto Alignment Page to edit and add data
Frequently Asked Questions
The core measurement technology used in the LAS-UP-VIS is focused laser reflection.
The LAS-UP-VIS is a non-contact lens alignment and inspection station designed for precision lens centration and tilt measurements of single element, doublet, triplet and multi-element lens assemblies.
The LAS-UP-VIS can measure lens radius ranging from +/- 1 mm to infinity (plano) and diameters from below 1 mm to 600 mm.
The optional CalcuLens™ Inspection software is required for extending the measurement to multi-element lens assemblies, adding powerful inspection capability for the quality assurance of finished lens assemblies.
The user-friendly CalcuLens™ Assembly software is standard to all LAS™ models and enables computer automated measurement of the alignment errors of a single lens for rapid bottom-up assembly.