ILT5000 SED240-ACT5-W Research Germicidal Light and Optical Radiation Hazard Measurement System
Description
Anti-Microbial & UV Disinfection
JUMP TO PRODUCT TABLE ›
ILT offers anti-microbial radiometer systems for testing effective germicidal ultraviolet irradiance for most short wave UV ("UV-C") sources including ozone producing and non-ozone producing, low and medium pressure mercury lamps, xenon lamps and UV LEDs. ILT sensors come in many configurations - effective germicidal UV light measurements conforming to the IES Luckiesh and DIN standards. Filtered for narrow bands such as 254, 365, and 405 nm, and unfiltered sensors calibrated at peak wavelengths such as 254, 265 and 275 nm for testing narrow band sources.
ILT5000 SED240-ACT5-W Research Germicidal Light and Optical Radiation Hazard Measurement System
Specifications |
|
|---|---|
| Vmax (VDC): | -- Volts |
| Pmax: | -- mW |
| Spectral Range: | 235-307nm |
| Peak Responsivity: | 270 nm |
| Response Time (rise): | -- ms |
Features
- 10+ Decade Dynamic Range of Optical Analysis
- Pico-ammeter: 10fA to 1mA (calibrated from 100fA - 1mA)
- Wireless Communication, Built-in
- User controlled or Auto: Range, Zero/Dark, Sample Rate
- 4-20 mA Output
- 15 pin D Sub and SMA sensor/input ports
- “Set it & Forget It” Remote Data Logging
- Power: USB or Built-in Re-Chargeable Battery Pack
- Multi-System Simultaneous Continuous Monitoring
- Includes DataLight II Software and Labview Sample Code
- NIST-Traceable/ISO17025 Accredited Calibration
- Sample Rate Up to 100 Hz, Programmable
- Made in the USA
- Custom & OEM Inquiries Welcome
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim International Light Technologies Page to edit and add data
Frequently Asked Questions
The ILT5000 SED240-ACT5-W is used for research germicidal light and optical radiation hazard measurement.
The measurement range of the ILT5000 SED240-ACT5-W is 3.00e to 2.50e effective Watts/cm.
The spectral range of the germicidal detector is 235 - 307 nm, with a calibration wavelength at 270 nm.
The spectral range of the actinic optical radiation hazard detector is 180 - 400 nm.
Yes, the ILT5000 SED240-ACT5-W is calibrated for readout in effective Watts per square centimeter.