High Linearity Position Sensing Detector 1L2.5_CP1
Description
The SiTek 1L2,5 PSD functions according to the Lateral Effect Photodiode principle. It is an analogue device and therefore displays excellent position resolution. The resolution is determined by the system signal-to-noise ratio. The 1L2,5 is operated in the biased mode. Typical applications include: distance and height measurement, alignment, position and motion measurements and vibration studies. Special UV- or YAG-enhanced and Nuclear versions are available.
High Linearity Position Sensing Detector 1L2.5_CP1
Specifications |
|
|---|---|
| Sensor Size: | 1.56 mm |
| Max Power: | -- W |
| Min Detectable Power: | -- mW |
| Spatial Resolution: | -- um |
| Max Power Density: | -- kW/cm^2 |
| Spectral Range: | 0.3-1.6um |
| Min Sensitivity: | 1 mV/W |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Sweden
-
Sold by:
-
On FindLight:
External Vendor
Claim SiTek Electro Optics AB Page to edit and add data
Frequently Asked Questions
The maximum ratings of the SiTek 1L2,5 PSD include a reverse voltage of 30 V, an operating temperature of 70°C, and a storage temperature of 100°C.
Typical applications of the SiTek 1L2,5 PSD include distance and height measurement, alignment, position and motion measurements, and vibration studies.
The resolution of the SiTek 1L2,5 PSD is determined by the system signal-to-noise ratio.
The SiTek 1L2,5 PSD is a position sensing detector that functions according to the Lateral Effect Photodiode principle.
The SiTek PM-kit is a series of general purpose, high performance, low-noise electronic boards designed for SiTek PSD that offers a complete and easy-to-use solution for most position measurement applications.