Digital TO-39 Flame Detectors
Description
The ezPyro range of thin film digital pyroelectric sensors for flame detection combines high quality sensors with a high level of configurable electronic integration in an industry standard TO-39 package. High sensitivity combined with fast response times ensure rapid and accurate flame detection. The high dynamic range allows detection of small and large flames, nearby or over larger distances. These sensors integrate a digital, current mode read-out offering high responsivity over the full frequency range of flame flicker (3-30 Hz). Programmable gain and filtering offer maximum flexibility in system design. Industry standard I 2C communication enables plug-and-play connectivity to microcontrollers and allows easy tuning and calibration. Pyreos sensors are very stable over time ensuring a long and maintenance-free operational lifespan. Various optical filter options are available. These sensors can also be daisy-chained to allow synchronized sampling across devices and offer various low power modes.
Digital TO-39 Flame Detectors
Specifications |
|
---|---|
Detector Type: | Pyroelectric |
Spectral Range: | 0.620-4.48um |
Size: | 5.2 mm |
Maximum Power: | -- W |
Noise Equivalent Power: | -- uW |
Max Average Power Density: | -- kW/cm2 |
Features
Better detection distances Across all flame frequencies
Fully digital – I2C;Short design cycles
Fully tuneable in operation
Reduced component count
Wide field of view for flame detection
Fast detection time
Instant switch-on
Applications
Fire & Safety
Water Cannons
Flame Detection
Outdoor Fire Detectors
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
United Kingdom
-
Sold by:
-
On FindLight:
External Vendor
Claim Pyreos Ltd Page to edit and add data
Frequently Asked Questions
Yes, various optical filter options are available for the sensors.
Yes, the sensors can be connected to microcontrollers through industry standard I2C communication.
The ezPyro range of sensors is used for flame detection.
The sensors can detect flame flicker over the full frequency range of 3-30 Hz.
The industry standard package used for the ezPyro sensors is TO-39.