Eltec Instruments Inc
Are you Eltec Instruments Inc representative? Claim This Page Today!
No one from Eltec Instruments Inc has updated the information yet
Claim Eltec Instruments Inc Page to edit and add data


Frequently Asked Questions

The Model 406 is a laser instrument that consists of a single lithium tantalate sensing element and a JFET source follower sealed into a standard TO-5 transistor package with an optical filter.

A 47kΩ or greater value resistor is recommended to set the drain current and operating parameters of the JFET.

The Model 406 can be used for motion sensing, lighting control, intrusion detection, industrial control, gas analysis, heating/AC control, pyrometry, low-power laser detection, robotics, and instrumentation testing.

The operating voltage range for the Model 406 is from V+ to Gnd, with a maximum of 15 VDC.

The Model 406 should be mounted to avoid mechanical stresses on the case and leads, and must be hand soldered to minimize the chance of destroying internal components. Machine or hot air soldering should be avoided. A heat sink should be used between the case and leads when soldering.

You May Also Like