EC1-L01 Screen Luminance And Film Density Meter
Description
The Hagner EC1-L01 is a compact instrument for measuring the luminance of luminous screens, for instance of film and slide viewers, X-ray viewers etc., and for easy calculation of film density. It has both an automatic zeroing and an on/off switch and the only controls needed are a four position range selection switch and a hold button to retain the displayed value.
The opening of the detector, which should be pressed against the screens, has a round aperture with an area of 1 cm².
The meter is normally calibrated to read from 0.1 cd/m² to 200,000 cd/m².
The calculation of film density requires also a simple calculator which will give the logarithm to base 10 of a number (LOG10).
EC1-L01 Screen Luminance And Film Density Meter
Specifications |
|
|---|---|
| Measurement Rate: | -- 1/sec |
| Measurement Range: | 1-200000lx |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Sweden
-
Sold by:
-
On FindLight:
External Vendor
Claim B Hagner AB Page to edit and add data
Frequently Asked Questions
The EC1-L01 is used to measure the luminance of luminous screens, such as film and slide viewers, X-ray viewers, and calculate film density.
The meter has an automatic zeroing and on/off switch, a four-position range selection switch, and a hold button to retain the displayed value.
The meter is normally calibrated to read from 0.1 cd/m² to 200,000 cd/m².
The detector has a round aperture with an area of 1 cm².
The meter requires a 9 Volt battery type PP3, which has a lifetime of 350 hours.