FILTER PRODUCTS

Select a category above to apply technical filters

Page 5 - Energy and Power Sensors

The QE12SP-S-MT-D0 is a pyroelectric detector designed for laser energy measurement. With a maximum measurement capacity of 0.70 J, it provides accurate and reliable results. This detector features a modular concept, allowing for increased power capability through two different cooling modules. The low noise level of 0.7 µJ, ...

Specifications

Max Measurable Energy: 700 mJ
Max Repetition Rate: 6000 Hz
Effective Aperture: 12 mm
Spectral Range: 0.19-20um
Typical Rise Time: 20 µs
...
Data Sheet
The QE12LP-S-MB-QED-D0 is a pyroelectric detector designed for accurate laser energy measurement up to 3.9 J. It features a modular concept, allowing you to increase the power capability with two different cooling modules. The detector offers a low noise level of 0.7 µJ with the MB coating, ensuring precise measurements. The ...

Specifications

Max Measurable Energy: 3900 mJ
Max Repetition Rate: 300 Hz
Effective Aperture: 9 mm
Spectral Range: 0.3-2.1um
Typical Rise Time: 550 µs
...
Data Sheet
The UP19K-110F-H9-D0 is a high-performance thermal detector designed for laser power measurement up to 110 W. It offers a compact design, fast rise time, and a high damage threshold. With its modular concept, it provides flexibility in increasing the power capability of the detector. The detector is equipped with a smart interface ...

Specifications

Max Average Power: 110 W
Effective Aperture: 19 mm
Spectral Range: 0.19-20um
Cooling Method: Water, Heatsink, Fan-cooled
Dimensions: 50H x 50W x 63D mm
...
Data Sheet
The QE50LP-H-MB-D0 is a high-performance pyroelectric detector designed for accurate laser energy measurement up to 15 J. It features a modular concept with two different cooling modules, allowing for increased power capability. The detector has a low noise level of 10 µJ for the MB coating, ensuring precise measurements. With ...

Specifications

Max Measurable Energy: 15000 mJ
Max Repetition Rate: 200 Hz
Effective Aperture: 50 mm
Spectral Range: 0.19-21um
Weight: 0.34 kg
...
Data Sheet
 The QE50SP-S-MT-D0 is a high-performance pyroelectric detector designed for accurate laser energy measurement. It offers a wide measurement range of up to 13 J, making it suitable for various laser applications. With its modular concept, low noise level, and smart interface, this detector provides precise and reliable energy ...

Specifications

Max Measurable Energy: 13000 mJ
Max Repetition Rate: 4000 Hz
Effective Aperture: 50 mm
Spectral Range: 0.19-20um
Repeatability: <0.5 %
...
Data Sheet
The QE12LP-H-MB-QED-D0 is a high-performance pyroelectric detector designed for laser energy measurement. With a maximum energy measurement capability of up to 3.9 J, this detector provides accurate and reliable results for a wide range of laser applications. The modular concept allows for increased power capability, while the low ...

Specifications

Max Measurable Energy: 3900 mJ
Max Repetition Rate: 300 Hz
Effective Aperture: 9 mm
Spectral Range: 0.3-2.1um
Dimensions: 39H x 41W x 38D mm
...
Data Sheet
Medium-High Power Fan Cooled Thermal Sensor F50A-BB-18
Ophir
Experience unparalleled precision and stability with the Ophir F50A-BB-18 Medium-High Power Fan Cooled Thermal Sensor, your ultimate solution for laser power and energy measurement. With a 17.5mm aperture and a spectrally flat broadband coating, it delivers consistent readings over an extensive spectral range from 0.19 to 20µm. ...

Specifications

Power Range (Power Mode): 0.01-50W
Energy Range (Energy Mode): 0.006-50J
Spectral Range: 0.19-20um
Aperture: N/A mm
Cooling: Air
...
Data Sheet
The Gentec-EO UP series of laser power detectors include seven families (XLP12, UP12, UP10, UP17, UP19, UP25, UP55) of opto-thermal sensors with different cooling options (stand alone, heat sink, fan and water), with or without amplification.  The high power surface absorber sensors are designed for use at high average power ...

Specifications

Max Average Power: 200 W
Effective Aperture: 19 mm
Spectral Range: 0.19-20um
Cooling Method: Water, Heatsink, Fan-cooled
Data Sheet
The Low-Cost Smart Detector Head/Optical Power Monitor is an OEM module that can be embedded in systems for remote power monitoring or for long-term power logging for burn-in test stations. The device offers a high, greater than 60 dB linear dynamic range, and can be easily embedded in long-term power monitoring stations like ...

Specifications

Max Average Power: -- W
Effective Aperture: 1 mm
Spectral Range: 0.9-1.65um
Cooling Method: No cooling
Measurement Range: IR: -50 to +10 dBm
...
Data Sheet
PowerMonitor PM 48
PRIMES GmbH
The PowerMonitor (PM) uses the same calorimetric principle as the CompactPowerMonitor. In contrast to the flat absorber in the CPM, the laser beam in the PowerMonitor is directed via a focusable mirror into a cylindrical absorber. A highly absorbent coating has been applied to the inside of the water-cooled absorber. The cylindrical ...

Specifications

Detector Type: Thermal Detectror
Min Power Measurement: 300000000 nW
Max Power Measurement: 8000 W
Spectral Range: 800-1100nm
Display: On Computer
...
Data Sheet
The Artifex Engineering OPM500 is a flexible, powerful, and easy-to-use optical power meter designed for precise measurement of power from pW to mW. It utilizes a photodiode to measure optical power and produces a voltage linearly proportional to the input power.    The OPM500 has USB and hard-wire interface control of ...

Specifications

Max Average Power: -- W
Effective Aperture: -- mm
Spectral Range: 0.25-2.2um
Cooling Method: Heatsink
Measurement Range: pW to mW
...
Data Sheet
The OPM200 Optical Power Meter is a cost-effective and powerful device designed for accurate and fast measurement of optical power in the range of μW to mW.    The device provides a linearly proportional output voltage in response to the input power. The device is fixed gain and features high-quality photodiodes and ...

Specifications

Max Average Power: 0.045 W
Effective Aperture: -- mm
Spectral Range: 0.2-2.2um
Cooling Method: No cooling
Wavelength Range (UV-Si): 200 – 950 nm
...
Data Sheet
Model 356 Photolithography UV Intensity & Energy Meter With 9 Point Memory
OAI
The Model 356 Photolithography UV Intensity & Energy Meter for Contact Mask Aligners is a microprocessor-based monitor that allows storage and recall of multiple exposure parameters (intensity, energy, and time) collected from an exposure series (400 mW/cm2, 9999 mJ/cm2, 9999 seconds max.) It calculates percent deviation and ...

Specifications

Max Measurable Energy: 9999 mJ
Max Repetition Rate: -- Hz
Effective Aperture: -- mm
Spectral Range: 356-456um
Data Sheet
Measure every pulse at up to 200 kHz with MACH 6. Measure with 12-bit digital accuracy and capture up to 4 million pulses in real time. Our MACH 6 Joulemeter is the only instrument in the world that performs at this speed, and with this precision.   It is designed to support our full complement of fast energy probes ...

Specifications

Max Measurable Energy: 2 mJ
Max Repetition Rate: 200000 Hz
Effective Aperture: 6 mm
Spectral Range: 0.9-1.6um
Data Sheet
Gentec-EO UD12-70-H5 thermal sensor disk. The Ultra Disks were designed for integration into laser systems. They are the solution if you are engineering the cooling and signal processing into your system already.  The chart in the data sheet show the various Possibilities that Gentec-EO offers to OEM users. The choice of a ...

Specifications

Max Measurable Energy: 5000 mJ
Max Repetition Rate: 14 Hz
Effective Aperture: 12 mm
Spectral Range: 0.19-20um
Data Sheet
The Gentec-EO QE series is a robust line of high performance and high accuracy pyroelectric joulemeters that are designed to measure laser energy. Each modular unit is built for durability, compactness and ease of operation.  The QE optical absorber exhibits high damage thresholds and can operate at high rep-rates. The QE ...

Specifications

Max Measurable Energy: 15000 mJ
Max Repetition Rate: 200 Hz
Effective Aperture: 50 mm
Spectral Range: 0.19-20um
Data Sheet
The Gentec-EO QE series is a robust line of high performance and high accuracy pyroelectric joulemeters that are designed to measure laser energy. Each modular unit is built for durability, compactness and ease of operation.  The QE optical absorber exhibits high damage thresholds and can operate at high rep-rates. The QE ...

Specifications

Max Measurable Energy: 50000 mJ
Max Repetition Rate: 20 Hz
Effective Aperture: 65 mm
Spectral Range: 0.19-20um
Data Sheet
The Gentec-EO QE series is a robust line of high performance and high accuracy pyroelectric joulemeters that are designed to measure laser energy. Each modular unit is built for durability, compactness and ease of operation.  The QE optical absorber exhibits high damage thresholds and can operate at high rep-rates. The QE ...

Specifications

Max Measurable Energy: 200000 mJ
Max Repetition Rate: 100 Hz
Effective Aperture: 62 mm
Spectral Range: 0.3-2.1um
Data Sheet
The Gentec-EO QE series is a robust line of high performance and high accuracy pyroelectric joulemeters that are designed to measure laser energy. Each modular unit is built for durability, compactness and ease of operation.  The QE optical absorber exhibits high damage thresholds and can operate at high rep-rates. The QE ...

Specifications

Max Measurable Energy: 50000 mJ
Max Repetition Rate: 20 Hz
Effective Aperture: 65 mm
Spectral Range: 0.19-20um
Data Sheet
Gentec-EO offers QE95 series energy detectors for pulse energy measurements of up to 250J in a wide spectral range with an attenuator and 70J - without attenuator. 

Specifications

Max Measurable Energy: 70000 mJ
Max Repetition Rate: 40 Hz
Effective Aperture: 95 mm
Spectral Range: 0.190-20um
Data Sheet
Gentec-EO offers QE95 series energy detectors for pulse energy measurements of up to 250J in a wide spectral range with an attenuator and 70J - without attenuator. 

Specifications

Max Measurable Energy: 250000 mJ
Max Repetition Rate: 40 Hz
Effective Aperture: 95 mm
Spectral Range: 0.3-2.1um
Data Sheet
UP55G-600F-HD-D0 is a Thermal Detector for Laser Power Measurement. It can measure powers as high as 600W. It can be used with Gentec's STAND-S-443-C custom stand. Please inquire for details. Compatible displays and interfaces include:MIRO ALTITUDE: Touchscreen display device for power & energy measurement. ...

Specifications

Max Average Power: 600 W
Effective Aperture: 55 mm
Spectral Range: 0.19-20um
Cooling Method: Fan-cooled
Maximum Measurable Energy: 200 J
...
Data Sheet
Handheld Optical Power Meter YPM-8201-01 YPM-8201-01 handheld optical power meter is concise, precise, and reliable, an ideal choice for optical power measurement . It is of moderate size and equipped with a large LCD screen. It can be powered by an adapter and rechargeable battery. It is also featured powerful functions, such as ...

Specifications

Max Average Power: 10m,5 W
Effective Aperture: 11.28 mm
Spectral Range: 200-1650um
Cooling Method: Convection
Model: YPM-8201/8202/8203/8204/8205
...
Data Sheet
The Gentec-EO Ultra Series UP power detector family includes thirteen series (XLP12, UP12E, UP10K(P), UP17P, UP19K, UP25N(M), UP25T, UP50N(M), UP55N(M), UP55C, UP60N(M), UP55G, and UP60G) of opto-thermal sensors with different cooling options (stand alone, heat sink, fan and water), with or without amplification. The high-power ...

Specifications

Max Average Power: 350 W
Effective Aperture: 25 mm
Spectral Range: 0.19-20um
Cooling Method: Water
Max Output Signal: N. A.
...
Data Sheet
Gentec-EO offers UP25 series high power detectors for laboratory and industrial applications.

Specifications

Max Average Power: 100 W
Effective Aperture: 25 mm
Spectral Range: 0.19-20um
Cooling Method: Heatsink
Max Average Power (1 Minute): 200 W
...
Data Sheet