Liquid Instruments - Bode Analizer
Description
The Moku Bode Analizer enables you to measure the frequency response of a system in both magnitude and phase using a swept sine output from 10mHz. Select from between 32 and 512 points per sweeps and configure setting and averaging time to balance total sweep duration and signal-to-noise ratio.
Liquid Instruments - Bode Analizer
Specifications |
|
|---|---|
| Frequency Range: | 10000-120000Hz |
| Frequency Resolution: | 3.55 microHz |
| Sweep Points: | >= 512 |
| Output Load: | 50 Ohm, 1 MOhm |
| Input Impedance: | 50 Ohm, 1 MOhm |
Features
Linear or logarithmic swept sine output
Probe two systems simultaneously, or one system at two points
Math channel to add, subtract, multiply or divide response functions as they are acquired
Monitor the magnitude and phase on the interactive Bode plot
Use cursors and markers to measure exact values on the plots
Precisely adjust settling and averaging time to suit device under test
Save a calibration trace to compare systems or remove spurious cable shifts
Easily save data and upload to the cloud
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2018
Frequently Asked Questions
The Moku Bode Analyzer is used to measure the frequency response of a system in both magnitude and phase using a swept sine output from 10mHz.
The features of the Moku Bode Analyzer include linear or logarithmic swept sine output, the ability to probe two systems simultaneously or one system at two points, a math channel to add, subtract, multiply or divide response functions as they are acquired, the ability to monitor the magnitude and phase on the interactive Bode plot, and the ability to precisely adjust settling and averaging time to suit the device under test.
Yes, you can use cursors and markers to measure exact values on the plots.
Yes, you can easily save data and upload it to the cloud.
You can select from between 32 and 512 points per sweep.