Manual Rotary Stage Metric Hole Pattern
Description
The MiniMech™ Rotary Stage provides a full 360 degrees of rotation from a stage supported on radial ball bearings. Coarse and fine adjustments are available, allowing initial rotation to be carried out by hand followed by fine adjustment over a range of 6 degrees using the fine adjusting screw. A vernier scale enables the angular position of the table to be read to an accuracy of 30 arcmin, although a minimum incremental movement or resolution of less than 30 arcsec can be achieved with care. Clearance holes in the top plate of this translation stage permit access to mounting holes in the base of the unit.
Manual Rotary Stage Metric Hole Pattern
Specifications |
|
|---|---|
| Tilt Range: | 360-6deg |
| Resolution (Micrometer Actuator): | 30 arcsec |
| Load Capacity: | 10 kg |
Features
Compact
Rotation 360˚ coarse, 6˚ fine
Lockable
Radial ball bearing design
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2017
Frequently Asked Questions
The MiniMech Rotary Stage provides a full 360 degrees of rotation.
The MiniMech Rotary Stage has a resolution of less than 30 arcsec.
The MiniMech Rotary Stage can hold up to 10 kg (22 lb) horizontally and 1 kg (2.2 lb) vertically.
The vernier scale on the MiniMech Rotary Stage can read the angular position of the table to an accuracy of 30 arcmin.
The MiniMech Rotary Stage is priced at $388.50 for both the metric and inch versions.