P 8/8 Stack Type Actuator Without Mechanical Preload
Description
The series P of actuators are based on stack type actuators made by the multilayer technology. They come without a mechanical pre-load, but they still can withstand medium pressure forces. They should be used only in static applications. The piezo stack is encased in stainless steel housing with the top and bottom epoxide to eliminate mechanical play. To protect the ceramic multilayer actuator, they are filled with flexible silicon rubber material. The multilayer stack actuator provides sub-millisecond response and sub-nanometer resolution.
P 8/8 Stack Type Actuator Without Mechanical Preload
Specifications |
|
|---|---|
| Motion Distance: | 9 um |
| Resolution: | 0.02 nm |
Features
no pre-load
motion up to 82 µm (larger motions available)
high stiffness up to 210 N/µm
Applications
micro positioning
mirror adjustment
scanning microscopy
valve control
laser tuning
semiconductors
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
External Vendor
Claim piezosystem jena GmbH Page to edit and add data
Frequently Asked Questions
The applications of the P 8/8 Stack Type Actuator Without Mechanical Preload include micro positioning, mirror adjustment, scanning microscopy, valve control, laser tuning, and semiconductors.
The P 8/8 Stack Type Actuator Without Mechanical Preload should be fastened with screw or clamps on the bottom plate of the actuator. During installation and use, it is important not to subject the actuator tip to non-axial forces. Actuators without pre-load are not suitable for dynamic applications.
The technical details of the P 8/8 Stack Type Actuator Without Mechanical Preload include a diameter of 5mm x 2.5 mm, L +1 mm, and a capacitance of 0.18 µF (±20%).
The motion range of the P 8/8 Stack Type Actuator Without Mechanical Preload is up to 82 µm (larger motions available).
The P 8/8 Stack Type Actuator Without Mechanical Preload is an actuator based on stack type actuators made by the multilayer technology. It comes without a mechanical pre-load, but it still can withstand medium pressure forces. It should be used only in static applications.