FIBER OPTIC TEMPERATURE SENSOR TS2
Description
The fiber optic temperature probe TS2 is designed for a wide range of applications, especially for the use inside of generators, power transformers as well as bus bars, R&D and industrial applications and offers immunity to RFI, EMI, NMR and microwave radiation – the best choice for a lot of challenges. The standard temperature sensor TS2 has a response time of <2s. With a standard deviation* of +/-0.2°C it allows precise and repeatable measurements. The coating of TS2 temperature sensor is made of PTFE, the fiber tip has adiameter of 1.0mm and has a ST-connector. For mechanical stability and applications e.g. in oil special protective coatings and hoses are available. The fiber optic probe TS2 consists of a PTFE protected glass fiber and a GaAs-crystal (Galliumarsenid) at the sensor tip. It is totally free of metal and immune to RFI, EMI, NMR and microwave radiation – therefore TS2 probes are explicit suitable for the use in high temperature ranges (-200°C to +300°C) as well as in aggressive and rough test Environments.
FIBER OPTIC TEMPERATURE SENSOR TS2
Specifications |
|
|---|---|
| Operation Temperature Range: | -200-300deg C |
| Temperature Sensitivity: | -- pm/degC |
| Response Time: | 2 Sec |
| Probe Diameter: | 0.2 mm |
| Probe Length: | 7000 mm |
Features
Temperature range: -200°C to +300°C
Non-conductive
Immunity to RFI, EMI, NMR and microwave radiation
Resistance to high temperatures
High accuracy
Stable and repeatable measurement
GaAs-based temperature sensor
Applications
EMI, RFI and microwave environments
High voltage environments
Process monitoring
Medical applications (MRT)
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
External Vendor
Claim Optocon AG Page to edit and add data
Frequently Asked Questions
The diameter of the fiber tip for the TS2 temperature sensor is 1.0mm and has an ST-connector.
The response time for the standard temperature sensor TS2 is less than 2 seconds.
The standard deviation for the TS2 temperature sensor is +/-0.2°C, allowing for precise and repeatable measurements.
The temperature range for the TS2 fiber optic temperature sensor is -200°C to +300°C.
The TS2 probe is suitable for use in EMI, RFI, and microwave environments, high voltage environments, and aggressive and rough test environments.