os4200 Optical Temperature Probe
Description
The os4200 Temperature Probes are sealed, stainless steel tubes that are designed to make handling easy and sensor installation fast and repeatable. It is based on fiber Bragg grating (FBG) technology. and since there are no epoxies holding the fiber to the tube, long term stability is ensured by design.
In side by side comparisons with conventional thermocouples, the os4200 is equally sensitive and accurate, while providing sub-second response time, wider operating range, no calibration, and no EMI noise. The os4200 Temperature Probe is qualified for use in harsh environments and delivers the many advantages inherent to all FBG based sensors.
This sensor can be used alone or in series at the end of an FBG sensor array. Installation and cabling for such arrays is much less expensive and cumbersome than comparable electronic gage networks. Options include packages that operate like conventional thermocouples with armored cables and protected connectors, and small probes that provide the user with both installation flexibility and sub-second response time.
With each sensor, Luna provides a Sensor Information Sheet listing the calibration coefficients needed to convert wavelength information into temperature. Luna’s ENLIGHT Sensing Software provides a utility to calculate and then record, display, and transmit data for large networks of sensors.
os4200 Optical Temperature Probe
Specifications |
|
|---|---|
| Operation Temperature Range: | -70-275deg C |
| Temperature Sensitivity: | 10 pm/degC |
| Response Time: | 0.3 Sec |
| Probe Diameter: | 1.07 mm |
| Probe Length: | 27.1 mm |
Features
- Fast response time.
- Qualified to same rigorous standards used for comparable electronic gages.
- Fast, simple, repeatable installation.
- Armored fiber cable weldable package and rugged sensor package.
- Connector protection fittings available for harsh environments.
- Several package options for field applications.
- Calibrated for high absolute accuracy.
- Capable of measuring from -70 to +275 degrees C.
- Luna’s patented micro opto-mechanical technology.
- Included in ENLIGHT’s sensor templates – allows for quick and easy optical to mechanical conversions.
Applications
- Structures (bridges, dams, tunnels, mines, buildings, oil platforms)
- Energy (wind turbines, oil wells, pipelines, nuclear reactors, generators)
- Transportation (railways, trains, roadways, specialty vehicles, cranes)
- Marine vessels (hull, deck, cargo containers)
- Aerospace (airframes, composite structures, wind tunnels, static and dynamic tests).
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2016
Frequently Asked Questions
With each sensor, Luna provides a Sensor Information Sheet listing the calibration coefficients needed to convert wavelength information into temperature. Luna’s ENLIGHT Sensing Software provides a utility to calculate and then record, display, and transmit data for large networks of sensors.
In side by side comparisons, the os4200 is equally sensitive and accurate, while providing sub-second response time, wider operating range, no calibration, and no EMI noise.
The os4200 Temperature Probe is suitable for use in structures, energy, transportation, marine vessels, and aerospace applications.
The os4200 Temperature Probe is a stainless steel tube that uses fiber Bragg grating (FBG) technology to measure temperature.
The os4200 Temperature Probe is capable of measuring from -70 to +275 degrees C.