All Categories
Electro-Optics

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Optical Systems
  3. Electro-Optics

Page 2 - Electro-Optics

LS-101 Pockel Cell Based Stabilizer
Brockton Electro-Optics Corp
Add to watch list
LS-101 Pockel Cell Based Stabilizer
For those in need in UV stabilization down to 325nm we have been selling our LS-101 model as a semi-custom system. Based on the CRi LS-100 model, the LS-101 is a Pockel cell based stabilizer which is available by special order. Please contact us for details. For those operating in the UV by using a doubled or tripled fundamental beam ...

Specifications
Long Term Stability: 0.03 %
Aperture: 2 mm
Data Sheet
LS-PRO Laser Intensity Stabilizer
Brockton Electro-Optics Corp
Add to watch list
LS-PRO Laser Intensity Stabilizer
With a 2MHz noise reduction bandwidth, this hybrid stabilizer uses a Liquid Crystal (LC) cell and Pockels cell feedback elements. This allows us to provide a high frequency noise reduction without the HIGH VOLTAGE drive requirements of typical Pockels cell stabilizers.

Specifications
Long Term Stability: 0.03 %
Aperture: 2 mm
Wavelength Range: 400-700 nm
Transmittance @ 633nm: 80%
Data Sheet
LPC Laser Power Controller
Brockton Electro-Optics Corp
Add to watch list
LPC Laser Power Controller
The Laser Power Controller (LPC) offers automated regulation and control of laser beam power. The LPC works with virtually any CW or mode-locked laser. The LPC can be controlled digitally using an RS-232 or optional GPIB interface, or via an analog input jack. An on-board microprocessor provides a 4-digit display of actual output ...

Specifications
Long Term Stability: 0.03 %
Aperture: 4 mm
Wavelength Range: 400-1700 nm
Data Sheet
CRYSTECH DKDP Pockels Cell
CRYSTECH Inc.
Add to watch list
CRYSTECH DKDP Pockels Cell
KD*P (Potassium Dideuterium Phosphate) is the most widely used material for electro-optical applications due to its excellent E-O properties.  An electro-optic material such as KD*P can alter the polarization state of light passing through it, when an applied voltage induces birefringence change in the crystal. When used in ...

Specifications
Aperture Diameter: 3-30 mm
Peak Optical Power Density: 1000 MW/cm^2
Wavelength Range: 400-1200nm
Transmission: 98 %
Extinction Ratio: >= 1000:1
...
Data Sheet
CRYSTECH RTP Q-switch
CRYSTECH Inc.
Add to watch list
CRYSTECH RTP Q-switch
RTP (Rubidium Titanyl Phosphate - RbTiOPO4) is a very desirable crystal material for electro­optic modulators and Q-switches. Due to its natural birefringence, It always works in pairs which are carefully matched to compensate the birefringence. The laser light propagates either in X-axis or Y-axis, and is polarized along the ...

Specifications
Aperture Diameter: 2-8 mm
Peak Optical Power Density: 600 MW/cm^2
Wavelength Range: 500-3000nm
Transmission: 98.5 %
Extinction Ratio: >= 100:1
...
Data Sheet
Y-BRANCH 1X2 PHASE MODULATOR
EOspace Inc
Add to watch list
Y-BRANCH 1X2 PHASE MODULATOR
Y-BRANCH 1X2 PHASE MODULATOR.

Specifications
Aperture Diameter: -- mm
Peak Optical Power Density: -- MW/cm^2
Wavelength Range: 400-700nm
Transmission: -- %
Extinction Ratio: Not Specified
Data Sheet
DUAL-PARALLEL MZM QPSK I/Q MODULATOR
EOspace Inc
Add to watch list
DUAL-PARALLEL MZM QPSK I/Q MODULATOR
LOW-VΠ VERSION: 25+GBAUD I/Q MODULATOR.

Specifications
Aperture Diameter: -- mm
Peak Optical Power Density: -- MW/cm^2
Wavelength Range: 400-700nm
Transmission: -- %
Extinction Ratio: Not Specified
Data Sheet
LOW-VΠ COMPACT X-CUT MODULATOR
EOspace Inc
Add to watch list
LOW-VΠ COMPACT X-CUT MODULATOR
1x1, 1x2, Low-Vπ compact X-cut modulator.

Specifications
Aperture Diameter: 5 mm
Peak Optical Power Density: -- MW/cm^2
Wavelength Range: 400-700nm
Transmission: -- %
Extinction Ratio: Not Specified
Data Sheet
Lithium Niobate Q-Switch Elements
Isowave
Add to watch list
Lithium Niobate Q-Switch Elements
Deltronic Crystal’s Lithium Niobate, with its combination of excellent optical transmission and high electro-optic coefficient, is an ideal choice for Pockels Cell Q-Switching. Crystals are grown, oriented and cut to provide z-axis optical propagation. Q-Switch elements are polished, electroded and anti-reflection coated, ready ...

Specifications
Aperture Diameter: -- mm
Peak Optical Power Density: 300 MW/cm^2
Wavelength Range: 1064-1064nm
Transmission: -- %
Extinction Ratio: >= 10:1
Data Sheet
Q1025-TxxL-H AO Q-SWITCH
Isomet Corp
Add to watch list
Q1025-TxxL-H AO Q-SWITCH
Q-switches are intracavity devices used to generate very high peak power, short duration laser pulses. These are typically loss modulators operating on the zero order beam. The goal of a Q-switch is to diffract as much power from the zero order as possible to increase the cavity loss and extinguish the laser output. When the RF drive ...

Specifications
Aperture Diameter: 1.0 mm
Peak Optical Power Density: 250 MW/cm^2
Wavelength Range: 1-1nm
Transmission: 85 %
Extinction Ratio: < 10:1
Data Sheet
Q1058C-SFxxL-H AO Q-SWITCH
Isomet Corp
Add to watch list
Q1058C-SFxxL-H AO Q-SWITCH
Q-switches are intracavity devices used to generate very high peak power, short duration laser pulses. These are typically loss modulators operating on the zero order beam. The goal of a Q-switch is to diffract as much power from the zero order as possible to increase the cavity loss and extinguish the laser output. When the RF drive ...

Specifications
Aperture Diameter: 1.0-1.5 mm
Peak Optical Power Density: 300 MW/cm^2
Wavelength Range: 1-1nm
Transmission: 85 %
Extinction Ratio: < 10:1
Data Sheet
Q1072-SF24L AO Q-SWITCH
Isomet Corp
Add to watch list
Q1072-SF24L AO Q-SWITCH
Q-switches are intracavity devices used to generate very high peak power, short duration laser pulses. These are typically loss modulators operating on the zero order beam. The goal of a Q-switch is to diffract as much power from the zero order as possible to increase the cavity loss and extinguish the laser output. When the RF drive ...

Specifications
Aperture Diameter: 1.5 mm
Peak Optical Power Density: 300 MW/cm^2
Wavelength Range: 1-1nm
Transmission: 80 %
Extinction Ratio: < 10:1
Data Sheet
iXBlue RF Driver DR-DG-10-MO
Qubig GmbH
Add to watch list
iXBlue RF Driver DR-DG-10-MO
iXBlue designs, produces and commercializes optical modulators intended for a variety of applications including : optical telecommunications, pulsed lasers, fiber sensors, RF over fiber …
Data Sheet
iXBlue RF Driver DR-PL-10-MO
Qubig GmbH
Add to watch list
iXBlue RF Driver DR-PL-10-MO
iXBlue designs, produces and commercializes optical modulators intended for a variety of applications including : optical telecommunications, pulsed lasers, fiber sensors, RF over fiber …
Data Sheet
iXBlue RF Drivet DR-AN-10-MO
Qubig GmbH
Add to watch list
iXBlue RF Drivet DR-AN-10-MO
iXBlue designs, produces and commercializes optical modulators intended for a variety of applications including : optical telecommunications, pulsed lasers, fiber sensors, RF over fiber …
Data Sheet
Q-SWITCH 24MHZ, 4MM SHEAR, BARBED FITTINGS
Cascade Laser Corp
Add to watch list
Q-SWITCH 24MHZ, 4MM SHEAR, BARBED FITTINGS
Q-SWITCH 24MHZ, 4MM SHEAR, BARBED FITTINGS

Specifications
Aperture Diameter: 3 mm
Peak Optical Power Density: 1000 MW/cm^2
Wavelength Range: 1047-1064nm
Transmission: 99.6 %
Extinction Ratio: Not Specified
Data Sheet
DKDP Q-Switch Pockels Cells
THATSHIGH Photoelectric Technology Co., Ltd.
Add to watch list
DKDP Q-Switch Pockels Cells
Custom Pockels Cells 

Specifications
Aperture Diameter: 19 mm
Peak Optical Power Density: 500 MW/cm^2
Wavelength Range: 240-1400nm
Transmission: >98% %
Extinction Ratio: >= 5000:1
...
Data Sheet