Fibersect Mechanical Cleaver
Description
Fibersect Mechanical Cleaver
Specifications |
|
|---|---|
| Supported Fiber Cladding: | 00-00um |
| Processing Time: | 1-4 s |
| Ferrule/Connector Adapters: | MT 0°/MT 8°/LC/LC-APC/LC-Duplex/SC/SC-APC + others |
| MT Ferrule Capabilities: | 4 to 72 fibers |
| Adapter Changeover Time: | 30 s |
| Allowable Fiber Protrusions From Ferrule: | 0 to 10 mm |
| Cut Length: | adjustable, 0-600 μm from face of ferrule |
| Cut Flatness: | +/- 10 µm |
| Options: | vacuum dust collector, cut counter, foot switch |
| Power Supply: | 100-240 Vac, 50-60 Hz + rechargeable battery powered |
| Dimensions (W X D X H): | 4.25 x 5.75 x 3 in. (108 x 146 x 76 mm) |
| Weight: | 2 lbs. (0.9 kg) |
Features
- Simple, one button operation
- Fast, 1-4 second cut cycle time
- Adjustable cut length, cuts parallel to the face of the ferrule
- Increases throughput by significantly reducing core cracks
- Eliminates: scoring/cleaving, denubbing, air polishing
- Significantly reduces final polishing steps
- Flat cut improves polished end face geometry
- Preserves ferrule length – provides tighter control over spring force
- Minimizes polishing by cutting close to ferrule
- Easy-change adapters enable cutting of all ferrules and connectors
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Connected Fibers Page to edit and add data
Frequently Asked Questions
The Fibersect Mechanical Cleaver operates with a simple push of a button and a 1-4 second cycle time.
The Fibersect Mechanical Cleaver increases throughput by significantly reducing core cracks, eliminates scoring/cleaving, denubbing, and air polishing, significantly reduces final polishing steps, preserves ferrule length, provides tighter control over spring force, minimizes polishing by cutting close to ferrule, and enables cutting of all ferrules and connectors with easy-change adapters.
The specs of the Fibersect Mechanical Cleaver include a processing time of 1-4 seconds, ferrule/connector adapters for MT 0°/MT 8°/LC/LC-APC/LC-Duplex/SC/SC-APC + others, MT ferrule capabilities of 4 to 72 fibers, an adapter changeover time of 30 seconds, allowable fiber protrusions from ferrule of 0 to 10 mm, adjustable cut length of 0-600 μm from face of ferrule, cut flatness of +/- 10 μm, and options for vacuum dust collector, cut counter, foot switch, and power supply of 100-240 Vac, 50-60 Hz + rechargeable battery powered.
The Fibersect Mechanical Cleaver is used to rapidly remove the epoxy and fibers of all ferrules and connectors, including MPO/MTP® ferrules and single fiber connectors and ferrules.
The Fibersect Mechanical Cleaver has dimensions of 4.25 x 5.75 x 3 in. (108 x 146 x 76 mm) and weighs 2 lbs (0.9 kg).