FILTER PRODUCTS

to
to

Page 2 - Cube Beamsplitters

Polarizing Cube Beamsplitters offer a transmission of greater than 95% for P-polarized light and a reflection efficiency of greater than 99.8% for S-Polarized light at designed wavelength, Each beamsplitter consists of a pair of precision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse ...

Specifications

Material: N-BK7, UV Fused Silica
Wavelength Range: 500-1600nm
Max Beam Deviation: 5 arcmin
Size (Linear Dimension): 25.4 mm
Standard Cube Beamsplitters are constructed by cementing two right angle prisms, offer a range of reflection/transmission ratios. An interference coating has been applied to the hypotenuse surface of one of the prisms to provide the designated reflection/transmission ratio. Absorption loss to the coating is minimal.Note: Output ...

Specifications

Material: N-BK7
Wavelength Range: 400-700nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 10 mm
Broadband Non-Polarizing Cube Beamsplitters consist of a pair of precision high tolerance right angle prisms cemented together with a metallic dielectric coating on the hypotenuse of one of the prisms. The low polarization dependence of the metallic dielectric hybrid coating allows the transmission and reflection of S- and ...

Specifications

Material: N-BK7
Wavelength Range: 400-700nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 10 mm
Narrowband polarizing beamsplitter cubes split the polarization states of an incoming beam. The p-polarization passes straight through the cube, while the s-polarization is reflected 90°. This split is the result of the multi-layer dielectric coating that has been placed on the internal hypotenuse surface. The entrance and exit ...

Specifications

Material: N-BK7
Wavelength Range: 0-488nm
Max Beam Deviation: -- arcmin
Size (Linear Dimension): 12.7 mm
These cemented Polarizing Beamsplitter Cubes are coated to enable operation over a wide range of wavelengths. The polarization separation is excellent with the transmitted and reflected beams at 90˚ to each other irrespective of wavelength.

Specifications

Material: Fused Silica
Wavelength Range: 650-950nm
Max Beam Deviation: -- arcmin
Size (Linear Dimension): 12.7 mm
These beamsplitter cubes use a hybrid (metal/dielectric) beamsplitter coating to achieve a remarkable degree of uniformity over a broad spectral range while limiting the polarizing tendencies of metal films. They are commonly used for low power applications where the slight amount of absorption by the film will not cause a problem.

Specifications

Material: N-BK7
Wavelength Range: 400-700nm
Max Beam Deviation: -- arcmin
Size (Linear Dimension): 12.7 mm
Material BK7 Grade Aoptical glass Dimension Tolerance ±0.2mm Clear Aperture >90% Flatness λ/4@632.8nm Beam Deviation <3 arc minutes Surface Quality 60/40 Coating Partial reflectance on hypotenuse faceAR coating on all entrances T/R 50/50±5%, T=(Ts+Tp)/2, R=(Rs+Rp)/2 Damage Threshold >500mJ/cm2, 20ns, ...

Specifications

Material: N-BK7, Fused Silica
Wavelength Range: 450-1200nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 20*20*20 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: SF5
Wavelength Range: 450-1200nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 15 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: SF5
Wavelength Range: 450-1200nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 12.7 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: SF5
Wavelength Range: 450-1200nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 10 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: SF5
Wavelength Range: 450-1200nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 5 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: SF5
Wavelength Range: 450-1200nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 3.2 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: N-BK7
Wavelength Range: 633-1550nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 15 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: N-BK7
Wavelength Range: 633-1550nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 12.7 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: N-BK7
Wavelength Range: 633-1550nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 10 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: N-BK7
Wavelength Range: 633-1550nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 5 mm
Non-polarizing beamsplitter cubes consist of a pair of precision right angle prisms that have been carefully cemented or mounted together to minimize wavefront distortion. It provides a true 50/50 split at a specific laser wavelength(e.g. 632.8), regardless of the incoming polarization. These beamsplitters are ...

Specifications

Material: N-BK7
Wavelength Range: 633-1550nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 3.2 mm
Non-Polarizing Plate Beamsplitters divide an incident, monochromatic beam into reflected and transmitted components with the specified intensity ratio. They are designed for applications in which it is necessary to maintain the polarization characteristics of the incident beam. The plate is coated on one side with an all dielectric, ...

Specifications

Material: ZnSe
Wavelength Range: 9000-11000nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): -- mm
Surface Figure: Lambda/40 @ 10.6 μm
Non-Polarizing Plate Beamsplitters divide an incident, monochromatic beam into reflected and transmitted components with the specified intensity ratio. They are designed for applications in which it is necessary to maintain the polarization characteristics of the incident beam. The plate is coated on one side with an all dielectric, ...

Specifications

Material: N-BK7, UV Fused Silica
Wavelength Range: 300-2000nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): -- mm
Surface Quality: 10-5 Scratch-Dig
Polarization Beamsplitter Cubes These beamsplitters are based upon using two complementary prisms. The output beam that is parallel to the input beam is p-polarized, while the orthogonal output beam is s-polarized.

Specifications

Material: N-BK7
Wavelength Range: 450-680nm
Max Beam Deviation: 3 arcmin
Size (Linear Dimension): 20 mm
Surface Quality/Scratch & Dig: 60/40