Not Specified Mirror Coatings

ARD Optics has all the technological possibilities to make the metallic coating on the optical surfaces by the chemical deposition method. The coating's base meanings is a reflection from the surface where the coating is made. At the same time, the coating could be used for brazing or for some other kinds of applications. The ...

Specifications

Coating Type: Other
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 0-1070nm
Reflection: up to 98%
Mirrors And Metals Enhanced First Surface Aluminum
Abrisa Technologies
Metal mirror coatings are often used in systems where a very broadband reflector or beam splitter is needed. Metal coatings can also be an excellent choice when an economical coating is especially important. Examples of common metal coating applications include telescope mirrors, neutral density filters, and general purpose ...

Specifications

Coating Type: VIS - NIR
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 450-800nm
Optical Mirror Coating
Evaporated Coatings Inc
ECI’s coatings consistently meet or exceed industry standards for environmental durability and laser damage. ECI’s coating designs can be optimized for maximum performance for the Ultraviolet, Visible, and Near Infrared spectrums. ECI deposits protected and enhanced metal optical coatings for military, medical, ...

Specifications

Coating Type: UV-NIR
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 248-2500nm
Coatings for Dielectric Mirrors
Intlvac Thin Film
Intlvac systems can produce a wide range of multi-layer, dielectric coatings depending on customer requirements. Custom filter options are available using a diverse range of substrates for applications in the VIS, NIR, SWIR, and MWIR spectral regions. Coating examples include:1. BANDPASS FILTERSCoating Description: ...

Specifications

Coating Type: VIS - NIR, MWIR, MWIR, Other
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 1-1nm
Custom Mirror Coatings
JBV Optical Co
Percent reflectance at normal incidence: Freshly Evaporated Mirror Coatings.

Specifications

Coating Type: UV-NIR, UV
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 220-220nm
High Reflector Coatings
Optonetic LLC
High Reflector Coatings.

Specifications

Coating Type: Custom
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 200-2000nm
Metallic Coatings - Reflective
Spectrum Thin Films Inc
Spectrum Thin Films can design metallic coatings for optical mirrors – laser, flat, metal substrate, focusing, or specialty mirrors in a range of reflective coating options at different regions of the spectrum, including aluminum, silver, gold, or dielectric. Standard metallic mirror coatings include Protected Aluminum, ...

Specifications

Coating Type: UV-NIR, UV
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 200-5000nm
Hot Mirror Filters
Spectrum Thin Films Inc
A hot mirror is in essence a thin film coating applied to substrates in an effort to reflect infra-red radiation either as a means to harness the reflected wavelengths for an application or to remove them from an application. Hot mirror filters transmit the visible spectrum and reflect the infrared at normal incidence.  The ...

Specifications

Coating Type: VIS
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 400-1500nm
Mirror Coatings Dielectric High Reflectors
Guernsey Coating Laboratories
High reflectors, sometimes referred to as laser mirrors, are used when a very high amount of light is needed to be reflected. They typically reflect between 99.0% to 99.995% with scatter as low as 50ppm. The angle of incidence and the center wavelength can be optimized from 0 to 70 degrees, and between 193nm and 3000nm. This type of ...

Specifications

Coating Type: VIS
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 450-590nm
Mirror Coatings Protected Silver
Guernsey Coating Laboratories
Protected silver offers a higher surface reflectivity than the enhanced aluminum coating. It provides an average reflection of approximately 97% in the visible wavelength range. This coating is a hybrid design optimized to provide increased environmental stability and maximum shelf life.

Specifications

Coating Type: VIS
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 400-700nm
Mirror Coatings Enhanced Aluminum
Guernsey Coating Laboratories
The enhanced aluminum design provides a better performance than protected aluminum coating. It averages about 94% reflection in the visible spectrum. The coating incorporates the use of a dielectric stack on the aluminum which provides a better resistance to abrasion than the raw metal.

Specifications

Coating Type: VIS
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 400-700nm
Mirror Coatings Protected Aluminum
Guernsey Coating Laboratories
This mirror offers solid performance. The design provides approximately an 88% average surface reflection in the visible spectrum. It has a silicon monoxide, SiO, overcoat to help provide a higher resilience to abrasion than bare aluminum.

Specifications

Coating Type: VIS
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 400-700nm
Newport Thin Film Laboratory\'s High Reflector
Newport Thin Film Laboratory
Many applications require surfaces that are highly reflective, and the most common technique for making mirrored surfaces is to vacuum deposit a reflective coating onto a polished surface. At Newport Thin Film Lab, we offer two types of mirror coatings to help with this.  The two options for vacuum deposited thin film reflectors ...

Specifications

Coating Type: VIS - NIR
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 630-770nm
Newport Thin Film Laboratory\'s Dielectric Mirrors
Newport Thin Film Laboratory
Many applications require surfaces that are highly reflective, and the most common technique for making mirrored surfaces is to vacuum deposit a reflective coating onto a polished surface. At Newport Thin Film Lab, we offer two types of mirror coatings to help with this.  The two options for vacuum deposited thin film reflectors ...

Specifications

Coating Type: MWIR, MWIR, NIR
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 1400-2600nm
Newport Thin Film Laboratory\'s Metal Mirror Coatings
Newport Thin Film Laboratory
Many applications require surfaces that are highly reflective, and the most common technique for making mirrored surfaces is to vacuum deposit a reflective coating onto a polished surface. At Newport Thin Film Lab, we offer two types of mirror coatings to help with this.  The two options for vacuum deposited thin film reflectors ...

Specifications

Coating Type: MWIR, MWIR, VIS - NIR, UV-NIR, UV - VIS, NIR, VIS, UV, DUV
Angle Of Incidence (AOI): Not Specified
Wavelength Range: 200-3200nm
On FindLight marketplace you will find 15 different Not Specified Mirror Coatings from suppliers around the world. With just a few clicks you can compare different Not Specified Mirror Coatings and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.