FILTER PRODUCTS

to
to

N-BK7 Flat Windows

Optical Windows are flat, plane-parallel plates that are often used as protective barriers for electronic sensors or detectors from outside environments. Optical Windows should be selected based on the material transmission or mechanical properties of the substrate. Optical windows do not cause change in the magnification of a system

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, Sapphire, Ge, CaF2, MgF2
Antireflection Coating: Uncoated
Diameter: -- mm
Surface Quality: 60-40 scratch-dig
Surface Flatness: lambda/2
Sapphire window is one of the basic optical components in optics, usually used as a protective window for electronic sensors or external environment detectors. It is used to separate the environment on both sides, such as separating the inside and outside of the instrument, so that the inside and outside of the instrument are ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, Ge, ZnSe, ZnS, CaF2, IR Grade CaF2, MgF2, BaF2, Si
Antireflection Coating: Coated
Diameter: 6-100 mm
Surface Quality: 10-5 scratch-dig, 20-10 scratch-dig, 40-20 scratch-dig, 60-40 scratch-dig, 80-50 scratch-dig
Surface Flatness: lambda/20, lambda/10, lambda/8, lambda/6, lambda/4, lambda/2, 1 lambda, Lambda/40
Windows are optical glass that have been ground and polished to form two surfaces parallel to each other. They are commonly used as protective devices for electronic sensors, optical lenses, and laser devices. Windows do not change the magnification of the system. The window piece does not change the magnification of the system. ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, Ge, ZnSe, ZnS, CaF2, IR Grade CaF2, MgF2, BaF2, Si
Antireflection Coating: N/A
Diameter: 6-100 mm
Surface Quality: 10-5 scratch-dig, 20-10 scratch-dig, 40-20 scratch-dig, 60-40 scratch-dig, 80-50 scratch-dig
Surface Flatness: lambda/20, lambda/10, lambda/8, lambda/6, lambda/4, lambda/2, 1 lambda, Lambda/40
Optical windows are often used in optical instruments, such as telescopes, microscopes, lasers, spectrometers, etc. They act as windows in the optical path to protect the interior of the optical system from the external environment and allow light to enter or leave the system.

Specifications

Substrate Material: N-BK7
Antireflection Coating: Coated
Diameter: 15 mm
Surface Quality: 20-10 scratch-dig
Surface Flatness: lambda/4
Windows are optical glass that have been ground and polished to form two surfaces parallel to each other. They are commonly used as protective devices for electronic sensors, optical lenses, and laser devices. Windows do not change the magnification of the system. The window piece does not change the magnification of the system. ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, Ge, ZnSe, ZnS, CaF2, IR Grade CaF2, MgF2, BaF2, Si
Antireflection Coating: N/A
Diameter: 6-100 mm
Surface Quality: 10-5 scratch-dig, 20-10 scratch-dig, 40-20 scratch-dig, 60-40 scratch-dig, 80-50 scratch-dig
Surface Flatness: lambda/20, lambda/10, lambda/8, lambda/6, lambda/4, lambda/2, 1 lambda, Lambda/40, Other
Experience cutting-edge performance with ARD-OPTICS High-Precision Optical Windows, made from top-quality sapphire and other glass materials. Our optical windows boast exceptional specifications, including surface quality up to S/D-10/5 according to MIL-PRF-13830B, surface flatness up to lambda/10 @632nm, and parallelism of polished ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, MgF2, Other
Antireflection Coating: Uncoated
Diameter: 5-200 mm
Surface Quality: 20-10 scratch-dig, 40-20 scratch-dig, 60-40 scratch-dig, 80-50 scratch-dig
Surface Flatness: lambda/10, lambda/8, lambda/6, lambda/4, lambda/2, 1 lambda
Optics manufacturing with thin film coatings (AR, BBAR, Metallic Mirrors, Hot Mirrors and Filters). Able to bond/cement multiple elements into Doublets, Triplets, x-cubes, Beam-splitters, Trichroic (Phillip) prism assembly (RGB), TIR Air gap prisms, Porro-Abbe prism assemblies and etc.

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica
Antireflection Coating: Uncoated
Diameter: 2-200 mm
Surface Quality: N/A
Surface Flatness: N/A
Photonchina’s windows are used to isolate different physical environments while allowing light to pass. When selecting windows you should consider materials, transmission, scattering, wavefront distortion, parallelism and resistance to certain environments.We offer a wide range of different materials and different degree of ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, CaF2, MgF2
Antireflection Coating: Coated, Uncoated
Diameter: 1-150 mm
Surface Quality: 10-5 scratch-dig, 20-10 scratch-dig, 40-20 scratch-dig, 60-40 scratch-dig
Surface Flatness: lambda/20, lambda/6, lambda/8, lambda/10
ICC provide Si, Ge, ZnSe, CaF2, BaF2, MgF2, BK7, Quartz,Sapphire Windows and Lenses.Grow optical fluoride crystals:CaF2 BaF2 MgF2 LiF &SiliconProduce Optical components:Optical windows ,lens,prisms,etcOther working materials:Ge/ZnSe/ZnS/Quartz/Optical Glass,etc   Call Us via +86-1800331094  |  ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, Ge, ZnSe, ZnS, CaF2, IR Grade CaF2, MgF2, BaF2, Si
Antireflection Coating: Uncoated
Diameter: Custom mm
Surface Quality: 10-5 scratch-dig, 20-10 scratch-dig, 40-20 scratch-dig, 60-40 scratch-dig, 80-50 scratch-dig
Surface Flatness: lambda/20, Lambda/40, 1 lambda, lambda/2, lambda/4, lambda/6, lambda/8, lambda/10
H-K9L BK7 GLass D32*2MM Polished AR Coated 400-1000nm T>95% ISO Certificated Factory,300 workers,25000m2 workshop. Call Us via +86-1800331094  |  Email us gina@bz-optical.com  |  bz-optical.com 

Specifications

Substrate Material: N-BK7
Antireflection Coating: N/A
Diameter: 32 mm
Surface Quality: N/A
Surface Flatness: N/A
Plane Window PW-0537-XX
OptiSource LLC
Plane Windows (PW) are most commonly used to separate two environments while still allowing light to pass through. They are intended for transmissive use and are parallel to equal to or better than five arc minutes. These windows are manufactured to a surface figure of λ/10 at 633nm, except where otherwise indicated. ...

Specifications

Substrate Material: N-BK7, UV Grade Fused Silica
Antireflection Coating: Coated
Diameter: 12.7 mm
Surface Quality: 10-5 scratch-dig
Surface Flatness: lambda/10
Plane Window PW-0525-XX
OptiSource LLC
Plane Windows (PW) are most commonly used to separate two environments while still allowing light to pass through. They are intended for transmissive use and are parallel to equal to or better than five arc minutes. These windows are manufactured to a surface figure of λ/10 at 633nm, except where otherwise indicated. ...

Specifications

Substrate Material: N-BK7, UV Grade Fused Silica
Antireflection Coating: Coated
Diameter: 12.7 mm
Surface Quality: 10-5 scratch-dig
Surface Flatness: lambda/10
Plane Window PW-0512-XX
OptiSource LLC
Plane Windows (PW) are most commonly used to separate two environments while still allowing light to pass through. They are intended for transmissive use and are parallel to equal to or better than five arc minutes. These windows are manufactured to a surface figure of λ/10 at 633nm, except where otherwise indicated. ...

Specifications

Substrate Material: N-BK7, UV Grade Fused Silica
Antireflection Coating: Coated
Diameter: 12.7 mm
Surface Quality: 10-5 scratch-dig
Surface Flatness: lambda/10
GLASS BK7 WINDOWS
UltiQuest Technology Co Ltd
A borosilicate crown glass, BK7 is relatively hard, does not scratch easily, and can be handled without special precautions. Good performance over visible and near IR spectrum for most application. The ideal window allows the optical beam to pass unimpeded and unchanged with high durability according to requirement of applications. ...

Specifications

Substrate Material: N-BK7
Antireflection Coating: Coated
Diameter: 10 mm
Surface Quality: 20-10 scratch-dig
Surface Flatness: lambda/10
Windows by AMF Optical Solutions
AMF Optical Solutions LLC
AMF Optical Solutions manufactures optical windows to meet various demanding applications. AMF Optical Solutions manufactures optical windows made of low expansion borosilicate glass and fused silica up to 24 inches in diameter to meet various demanding applications. Surface flatness of λ/4 to λ/20 are available. We ...

Specifications

Substrate Material: N-BK7, Fused Silica, Other
Antireflection Coating: Coated, Uncoated
Diameter: 61 mm
Surface Quality: Not Specified
Surface Flatness: lambda/20, lambda/4, lambda/6, lambda/8, lambda/10
BK-7 Optical Glass
Swiss Jewel Company
BK-7 Optical Glass.We offer a range of optical glass and technical glass made mostly from Schott and Ohara materials. Other materials available upon request.

Specifications

Substrate Material: N-BK7
Antireflection Coating: Coated
Diameter: - mm
Surface Quality: Not Specified
Surface Flatness: Other
OPTICAL WINDOWS AND FLATS
Gooch and Housego
G&H deliver high performance optical windows and flats across a wide range of applications. From small precsion optical flats for interferometry applications, to large windows installed in military vehicles, our components are custom designed to deliver performance and value.  Optical windows are a critical component in a ...

Specifications

Substrate Material: N-BK7, Fused Silica, Ge, ZnSe, ZnS
Antireflection Coating: Coated
Diameter: 300 mm
Surface Quality: Not Specified
Surface Flatness: Other
Flat Windows
Lensel
We can make lenses up to 300 mm in size. The lens shown is a 290mm long, 160mm wide, 60mm thick plano convex lens used in the Pharmaceutical Industry as a magnifier.

Specifications

Substrate Material: N-BK7, Fused Silica
Antireflection Coating: Coated
Diameter: 300 mm
Surface Quality: 40-20 scratch-dig
Surface Flatness: lambda/10
Optical flat is an optical glass polished to be extremely flat on one or both sides. Flatness can be from L/4-L/20 as requested.If for single surface high precision optical flats, normally we have an arrow in the edge to indicate the high precision surface.Application: Polish machine colimate,flatness standard, laser system, ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, Ge
Antireflection Coating: Uncoated
Diameter: 400 mm
Surface Quality: 60-40 scratch-dig
Surface Flatness: lambda/20, lambda/10
Optical Window: Optically flat, double sides parallel polishing of the optical glass into a relatively high precision of the surface. Mostly it is used for the testing or assembly equipments in order to allow light get into the testing machine or the instruments. PHYO Optics provide many different type of windows using various ...

Specifications

Substrate Material: N-BK7, Fused Silica, UV Grade Fused Silica, IR Grade Fused Silica, Sapphire, Ge, ZnSe, ZnS, CaF2, IR Grade CaF2, MgF2
Antireflection Coating: Coated, Uncoated
Diameter: 25.4 mm
Surface Quality: 10-5 scratch-dig
Surface Flatness: lambda/8, lambda/4
On FindLight marketplace you will find 28 different N-BK7 Flat Windows from suppliers around the world. With just a few clicks you can compare different N-BK7 Flat Windows and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.