Corner Cube Retroreflector Prism
Description
Corner cube retro-reflectors reflect an image or beam back toward its original direction via three total internal reflections (TIR). The beam or image will be inverted and reflected through 180° even if the angle of incidence is not zero. The insensitivity of the alignment of these prisms make them ideal retroreflecting optics. For these retroreflecting prisms, the incident and reflected beams will be parallel to within 3 arcsec. However, unless the incident and reflected beams strike the exact center of the optic, they will not overlap but rather be shifted with respect to each other. For example, if the incident beam strikes the optic 3 mm to the right of center, the retroreflected beam will emerge 3 mm to the left of center.
Retroreflectors manufactured by Photonchina have three mutually perpendicular surfaces and a hypotenuse face. A beam goes into the hypotenuse surface reflected by each of the three surfaced in turn, and goes out from the hypotenuse surface parallel to the entering beam. It is able to retro-reflects over a wide range of incident angles, useful in applications where precise alignment is difficult to achieve, or where vibration is present.
As a professional supplier of corner cube prisms in China, we offer uncoated retroreflectors as well as versions with antireflection (AR) coatings in one of three ranges: 350 - 700 nm, 650 - 1050 nm, or 1050 - 1700 nm. Sizes are able to choose from Diameter options of 10mm,12.7mm,25.4mm to 50mm.
Customized sizes and coating requirement is also available.
Corner Cube Retroreflector Prism
Specifications |
|
---|---|
Type And Material: | BK7, Sapphire, Ge, ZnSe, N-SF11, F2, CaF2, IRFS, UVFS, FS, Other |
Length: | custom mm |
Diameter: | custom mm |
Height: | custom mm |
Thickness: | custom mm |
Mounting: | Unmounted, Mounted |
Features
Material:
N-BK7/N-SF11 or other glass materials
Design wavelength
633nm
AR coating
Ravg<0.5% AOI=0deg
Dimensional Tolerance:
+0.0/-0.1mm
Beam deviation
<3 arc seconds
Flatness:
λ/4 @ 632.8nm
Surface Quality:
20-10
Clear Aperture:
>90%
Bevel:
<0.2mm X 45°
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
China
-
Sold by:
-
On FindLight:
since 2019
Frequently Asked Questions
Yes, customized sizes and coating requirements can be accommodated.
The available sizes for the prism are Diameter options of 10mm, 12.7mm, 25.4mm to 50mm.
A corner cube retroreflector prism is an optical device that reflects an image or beam back toward its original direction via three total internal reflections.
The dimensional tolerance of the prism is +0.0/-0.1mm.
The insensitivity of the alignment of these prisms makes them ideal retroreflecting optics.