FILTER PRODUCTS

to
to
to
to

UVFS Retroreflectors

Corner Cube Retroreflectors are prisms designed to deviate incident light by 180 degrees independently of the angle of incidence. These retroreflectors have three mirror surfaces making angles of 90 degrees to each other, forming the corner of a cube with the entrance face perpendicular to the cube diagonal. They are mainly used in ...

Specifications

Type And Material: BK7, UVFS
Length: NA mm
Diameter: 25.4 mm
Height: 19 mm
Thickness: NA mm
Corner Cube Retro Reflector operates on the principle of Total Internal Reflection (TIR). An incident beam will be reflected parallel to itself by the three roof surfaces. The reflection is insensitive to the incident angle, even when the incident beam enters the prism off normal axis, there will still be a strict 180deg reflection.

Specifications

Type And Material: UVFS
Length: 50 mm
Diameter: 50 mm
Height: 10 mm
Thickness: 5 mm
Corner cube retro-reflectors reflect an image or beam back toward its original direction via three total internal reflections (TIR). The beam or image will be inverted and reflected through 180° even if the angle of incidence is not zero. The insensitivity of the alignment of these prisms make them ideal retroreflecting optics. ...

Specifications

Type And Material: BK7, Sapphire, Ge, ZnSe, N-SF11, F2, CaF2, IRFS, UVFS, FS, Other
Length: custom mm
Diameter: custom mm
Height: custom mm
Thickness: custom mm
Optica Corner Cube Retro Reflector
Optics India
Corner Cube Retro Reflector are used to reflect light beam back to the direction that it comes from. The reflected beam is always parallel to to the incident beam, and it travels in the reverse direction of the incident beam. This hold true regardless of the angle of incident beam. The beam reflection is achieved either through total ...

Specifications

Type And Material: BK7, FS, UVFS
Length: custom mm
Diameter: custom mm
Height: custom mm
Thickness: custom mm
Corner Cubes / Solid Retro Reflectors (CCP)
Lambda Research Optics
Corner cubes are excellent retro-reflectors. They return an incoming beam in the opposite direction along the same path. They produce a two dimensional 180° beam deviation making them useful for alignment purposes. These prisms are manufactured from BK7A or Fused Silica and may be selected to have 2, 5 or 10 arc sec angular deviation ...

Specifications

Type And Material: BK7, UVFS
Length: -- mm
Diameter: -- mm
Height: 5.0 mm
Thickness: -- mm
Retroreflectors are trihedral prisms, Commonly referred to as corner cubes, the prisms most sold available in three different sizes (Ø10.0 mm, Ø25.4 mm, or Ø50.0 mm). Retroreflectors reflect an image or beam back toward its original direction via three total internal reflections (TIR). The beam or image will be inverted and reflected ...

Specifications

Type And Material: BK7, FS, UVFS, Ge
Length: 0 mm
Diameter: 25.4 mm
Height: 19.0 mm
Thickness: 10 mm
Corner Cube Retro-Reflectors operate on the principle of total internal reflection (TIR). A beam entering the effective aperture is reflected by the three roof surfaces and emerges from the entrance / exit surface parallel to itself. This property is independent of orientation of the retro-reflector, within acceptance angle ...

Specifications

Type And Material: BK7, FS, UVFS
Length: - mm
Diameter: - mm
Height: - mm
Thickness: - mm
On FindLight marketplace you will find 7 different UVFS Retroreflectors from suppliers around the world. With just a few clicks you can compare different UVFS Retroreflectors and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.