Ion Gun Systems G-1
Description
Beam Imaging Solutions (BIS) has two Ion Gun systems to offer. Each Gun includes an ion source assembly, heat sink, acceleration and focusing system, vertical deflection plates, a 6″ long velocity filter and a velocity filter guard ring control unit. Components are assembled in a vacuum housing fitted with a flange for mounting onto the customer’s equipment. The guard ring control unit can be mounted into a standard 19″ rack panel. Custom flanges and additional ports may be ordered if needed. When a beam decelerator is required with the gun, an adapter flange is included (model G-1-D and G-2-D Ion Guns). Beam Imaging also offers control units (E-series) for the above Ion Gun Systems. The control units include all power supplies needed to operate the Ion Gun as well as a cooling unit for the ion source and vacuum gauge controls. All Ion Beam Components are also available separately or in complete sets (ion source, heat sink, velocity filter, extraction and focus lens system). These complete sets are referred to as an Ion Beam Kit. The model G-1 can be operated in an energy range of 500 eV to 10 keV (with optional 20keV). If an ion beam energy less than 500 eV is required, we recommend using the model G-1-D, which includes the model 400 decelerator and can produce mass selected ion beams with energies as low as 1 eV. The vacuum housing of the model G-1 series is made of a polished stainless steel tube, 6″ in diameter and approximately 19″ long. The length includes the model 500 insulator-mounting flange. The total length of the G-1-D is 23 1/8″ when used with the model 400 decelerator. Both Ion Gun housings are supplied with a 6″ ID roughing port. The standard exit flange on the models G-1 and G-1-D are an 8″ OD and 6″ ID conflat flange. The model G-1-D, however, has a 2 3/4″ exit flange when used with the decelerator. Both the model G-1 and G-1-D are good for vacuum use to 10-7 Torr and are not designed for bakeout.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Beam Imaging Solutions Page to edit and add data
Frequently Asked Questions
The Ion Gun system includes an ion source assembly, heat sink, acceleration and focusing system, vertical deflection plates, a 6" long velocity filter, and a velocity filter guard ring control unit.
Yes, the guard ring control unit can be mounted into a standard 19" rack panel.
Yes, custom flanges and additional ports can be ordered if needed.
If a beam decelerator is required, an adapter flange is included with the model G-1-D and G-2-D Ion Guns.
The model G-1 can be operated in an energy range of 500 eV to 10 keV, with an optional 20 keV.