All Categories
Fiber Optomechanics

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Fiber Optics
  3. Fiber Optomechanics

Page 9 - Fiber Optomechanics

FC/B Connector FC Connector At Brewster Angle
IRflex Corp
Add to watch list
FC/B Connector FC Connector At Brewster Angle
Chalcogenide As2S3 and As2Se3 glass fibers offer a broad transmission range with low propagation loss from 1.5μm to 6.5μm and from 1.5μm to 10μm relatively, with high non-linear coefficient, small and negative index change with temperature (dn/dT), excellent power handling capability, and are chemically stable. Transmission ...
Data Sheet
APODIZED - CHIRPED FIBER BRAGG GRATING GTL-FBG-ADG-820
FORC-Photonics
Add to watch list
APODIZED - CHIRPED FIBER BRAGG GRATING GTL-FBG-ADG-820
The apodized FBGs have special profile of induced refractive index modulation and grating strength along the grating length. Therefore, side lobes level becomes smaller in compared to ordinary gratings. There are a lot of apodization profiles which lead to the optimization of various FBG parameters such as strength, FWHM, SLSR, the ...

Specifications
Center Wavelength Range: 633-2300nm
FBG Length: Custom
Reflectivity: Not Specified
Reflectivity, %: 5 ÷99
Chirp Rate, Nm/cm: 0.01 ÷ 25
...
Data Sheet
LASER MATCHED FIBER BRAGG GRATING PAIRS GTL-FBG-LP-830
FORC-Photonics
Add to watch list
LASER MATCHED FIBER BRAGG GRATING PAIRS GTL-FBG-LP-830
Fiber Bragg Gratings have many applications in optical communication, laser technique and sensing systems. The FBGs are widely used like in-fiber mirrors or optical filters with narrow band optical spectrum. FBGs can be used like a sensitive element for strain and temperature measuring.

Specifications
Center Wavelength Range: 600-2300nm
FBG Length: Custom
Reflectivity: Not Specified
Reflectivity, % (Low-reflection(LR)): 5 ÷ 40
Reflectivity, % (High-reflection(HR)): › 99
...
Data Sheet
π-PHASE-SHIFTED FIBER BRAGG GRATING GTL-FBG-PS-870
FORC-Photonics
Add to watch list
π-PHASE-SHIFTED FIBER BRAGG GRATING GTL-FBG-PS-870
Fiber Bragg Gratings have many applications in optical communication, laser technique and sensing systems. The FBGs are widely used in-fiber mirrors and optical filters with narrow band optical spectrum. FBGs can be used as a sensitive element for strain and temperature measurements.

Specifications
Center Wavelength Range: 600-2300nm
FBG Length: Custom
Reflectivity: Not Specified
SLSR, DB : ‹ 8 ÷ 25
Reflectivity, %: 50 ÷ 99
...
Data Sheet
APODIZED FIBER BRAGG GRATINGS GTL-FBG-AD-820
FORC-Photonics
Add to watch list
APODIZED FIBER BRAGG GRATINGS GTL-FBG-AD-820
Fiber Bragg Gratings have many applications in optical communication, laser technique and sensing systems. The FBGs are widely used in-fiber mirrors or optical filters with narrow band optical spectrum. FBGs can be used like a sensitive element for strain and temperature measuring.

Specifications
Center Wavelength Range: 600-2300nm
FBG Length: Not Specified
Reflectivity: >90%
Reflectivity, %: 0.5 ÷ 99.9
Bandwidth (WFHM), Nm: 0.1 ÷ 1.2
...
Data Sheet
FIBER BRAGG GRATING FOR RAMAN LASERS GTL-FBG-RL-880
FORC-Photonics
Add to watch list
FIBER BRAGG GRATING FOR RAMAN LASERS GTL-FBG-RL-880
Highly efficiently multicascaded Raman lasers based on phosphosilicate fibers can be created at different wavelength. Raman shift by 1330 cm-1 in opposite to Ge-doped fibers is approximately three times larger.  Output emission spectrum of two-cascade 1.48 µm Raman fiber laser is presented in the graph.

Specifications
Center Wavelength Range: 1240-1484nm
FBG Length: Not Specified
Reflectivity: >90%
Wavelength Range, Nm: 1240,1270,1484
Types Of Fiber: Single-Mode, PM, Double clad, LMA
...
Data Sheet
TILTED FIBER BRAGG GRATING GTL-FBG-TL-860
FORC-Photonics
Add to watch list
TILTED FIBER BRAGG GRATING GTL-FBG-TL-860
The Tilted FBG has an angle between wave vector of the grating and fiber axis. Therefore cladding modes resonances peaks become more intensive compared to ordinary gratings. TFBG cladding modes resonances wavelength are highly sensitive to the refractive index of the medium outside the fiber cladding. TFBGs are useful in sensing ...

Specifications
Center Wavelength Range: 600-2300nm
FBG Length: Custom
Reflectivity: >90%
Tilt Angle, °: 1 ÷ 45
Reflectivity, %: 5 ÷ 99
...
Data Sheet
FCC-2-λ Fiber-Optic Collimator
Innovation Photonics
Add to watch list
FCC-2-λ Fiber-Optic Collimator
Twist-On Collimators connect quickly to FC or SMA connectorized fiber cables to produce a collimated beam. Twist-On Collimators contain a micro lens that is designed for diffraction-limited performance. Both surfaces of the lens are antireflection coated, with >98% transmission at the peak wavelength. Focal compensation ...
Data Sheet
OSG10 And OSG20 Programmable Filters
INLC Technology Inc
Add to watch list
OSG10 And OSG20 Programmable Filters
OSG10 and OSG20 programmable optical filters are versatile test instruments that can be controlled by a PC via an intuitive user interface to create arbitrary filter shapes. 

Specifications
Operating Wavelength Range: 1527-1565nm
Free Spectral Range: 191 GHz
Finesse: --
Bandwidth: 12.5-4800 GHz
Insertion Loss: 3.5-4.5 dB
...
Data Sheet
OSG30 1×2-2×1 Programmable Optical Filters
INLC Technology Inc
Add to watch list
OSG30 1×2-2×1 Programmable Optical Filters
OSG30 1×2/2×1 programmable optical filters offer the functionality of interleaver configurations and other switching configurations with very high port isolation. OSG30 filters are controlled by a PC via an intuitive user interface.

Specifications
Operating Wavelength Range: 1527-1565nm
Free Spectral Range: 196 GHz
Finesse: --
Bandwidth: 12.5-4800 GHz
Insertion Loss: 6.5-7.0 dB
...
Data Sheet
OSG12 High-Resolution Programmable Filter
INLC Technology Inc
Add to watch list
OSG12 High-Resolution Programmable Filter
OSG12 High-Resolution Programmable Filters allow the user to create arbitrary filter shapes with control over amplitude/ power level, and center frequency in spectrum slices as narrow as 6.25 GHz. The OSG12 can be controlled by a PC via an intuitive, menu-driven interface to facilitate testing, measurement, and optical characterization.

Specifications
Operating Wavelength Range: 1527-1565nm
Free Spectral Range: 196 GHz
Finesse: --
Bandwidth: 4800 GHz
Insertion Loss: 4.5 dB
...
Data Sheet
Collimator IMK-0722-R-K-U-LD-650571A
IMM Photonics GmbH
Add to watch list
Collimator IMK-0722-R-K-U-LD-650571A
Collimator IMK-0722-R-K-U-LD-650571A.
Data Sheet
Collimator IMK-0714-E-G-QL85D6SA
IMM Photonics GmbH
Add to watch list
Collimator IMK-0714-E-G-QL85D6SA
Collimator IMK-0714-E-G-QL85D6SA.
Data Sheet
Collimator IMK-0714-R-K-U-LD-650571A
IMM Photonics GmbH
Add to watch list
Collimator IMK-0714-R-K-U-LD-650571A
Collimator IMK-0714-R-K-U-LD-650571A.
Data Sheet
Single Mode Standard LC Ferrule
Kientec Systems Inc
Add to watch list
Single Mode Standard LC Ferrule
Our high precision standard zirconia ferrules are designed for high reliability and performance. Available ferrule types are SC, ST, LC, SMA with flat, dome, cone, step, or pre-angled end-faces.
Data Sheet
Multi Mode Standard SC Ferrule
Kientec Systems Inc
Add to watch list
Multi Mode Standard SC Ferrule
Our high precision standard zirconia ferrules are designed for high reliability and performance. Available ferrule types are SC, ST, LC, SMA with flat, dome, cone, step, or pre-angled end-faces.
Data Sheet
Single Mode Standard SC Ferrule
Kientec Systems Inc
Add to watch list
Single Mode Standard SC Ferrule
Our high precision standard zirconia ferrules are designed for high reliability and performance. Available ferrule types are SC, ST, LC, SMA with flat, dome, cone, step, or pre-angled end-faces.
Data Sheet
Laser Beam Shutters For Safety and Beam Control Applications LS-10-12
Lasermet Inc
Add to watch list
Laser Beam Shutters For Safety and Beam Control Applications LS-10-12
The LS- range of laser beam shutters are combined shutters and beam dumps designed to be driven by a safety control system such as any Lasermet ICS- laser interlock control system, for use as a means of shutting down the laser beam automatically during unauthorized access, or manually when the beam is not required. They can also be ...

Specifications
Insertion Loss: -- dB
Power Handling (max): 20 W
Shutter Response Speed: -- msec
Data Sheet
K 50/40 MD Small-Size Aperture Collimator With Double Micrometer
Moeller-Wedel Optical GmbH
Add to watch list
K 50/40 MD Small-Size Aperture Collimator With Double Micrometer
A collimator with double micrometer allows the setting of defined image angles in two directions. The movement of the reticle in x- and y-direction in the focal plane is measured with measuring drums. The scale division (SD) is 5 µm.  
Data Sheet
K 50/40 SW Small-Size Aperture Collimator With Reticle Turret
Moeller-Wedel Optical GmbH
Add to watch list
K 50/40 SW Small-Size Aperture Collimator With Reticle Turret
A collimator with a reticle turret provides 6 selectable collimator reticles. The reticle turret allows a quick change of reticles for different measurement tasks.   
Data Sheet
K 50/40 Small-Size Aperture Collimator
Moeller-Wedel Optical GmbH
Add to watch list
K 50/40 Small-Size Aperture Collimator
The simplest version of a collimator is a collimator with fixed focus setting and one collimator reticle. We offer collimators with different focal lengths and diameters. 
Data Sheet
Fiber Large Beam Collimators
Sherlan Optics
Add to watch list
Fiber Large Beam Collimators
Large Beam Collimator high-performance pure Gaussian beam fiber collimators are designed and manufactured with special applications in mind ranging from Lidar, Interferometry, Remote Sensing, to Spectroscopy, Biomedicals, and Sensors. A wide variety of fibers and numerical aperture (NA) can be used including singlemode, multimode, or ...
Data Sheet
LST200SLP High-Speed Laser Shutter
NM Laser Products Inc
Add to watch list
LST200SLP High-Speed Laser Shutter
This high-speed laser shutter model is designed for use as a fast process laser shutter and quick reaction laser safety interlock. The inherent speed is achieved with minimum electrical power requirement. The LST200SLP is used routinely in application that operates 24/7/365, accumulating billions of cycles.It is our highest ...

Specifications
Insertion Loss: -- dB
Power Handling (max): 2 W
Shutter Response Speed: 1 msec
Data Sheet
LST4WBK2 Laser Shutter
NM Laser Products Inc
Add to watch list
LST4WBK2 Laser Shutter
This laser shutter model is designed for use as a laser safety interlock and for slow processing applications. The magnetic system allows use from 12 or 24 VDC based circuits. Position sensors are built-in standard, yielding logic outputs for both open and closed states. Dielectric mirrors are available for common wavelengths, ...

Specifications
Insertion Loss: -- dB
Power Handling (max): 50 W
Shutter Response Speed: 5 msec
Data Sheet
LST400 Laser Shutter
NM Laser Products Inc
Add to watch list
LST400 Laser Shutter
This laser shutter model is designed for use as a laser safety interlock and for some laser processing applications. The LST400 provides TTL output position sensors for the open and closed states as standard equipment. The thin body style and 8 mm aperture accommodate many popular laser sources. The –IR suffix replaces the ...

Specifications
Insertion Loss: -- dB
Power Handling (max): 50 W
Shutter Response Speed: 10 msec
Data Sheet