Laser Engraving Plate and XY Slide with 18″ Table
Description
Shortly after Sherline purchased a new engraving laser from Jimani we decided to manufacture our own laser engraving tooling plate. Jimani was already using our rotary table, and since we make our own X/Y tables we believed that we could build a custom X/Y table with a tooling plate that would enhance the operation of the laser while adding ease and versatility to set-ups.
The tooling plate is 8″ x 18″ x ¾” black anodized 6061 aluminum. This tooling plate was designed to mount on our 18″ Industrial X/Y Slide. The slide has 5″ of Y-axis travel and 13.6″ of X-axis travel. Handwheels are calibrated in .001″ increments for the inch slide and in .01mm increments for metric.
Laser Engraving Plate and XY Slide with 18″ Table
Specifications |
|
|---|---|
| Application: | Laser Engraving |
| Length: | 457 mm |
| Width: | 203 mm |
| Build Material: | Anodized Aluminum |
Features
- (115 Green) Dual purpose ¼” holes, on 1″ centers. These holes are threaded ¼-20 on the bottom and reamed to ¼” on the top. This allows each hole to be used as a “part locating” hole when you insert a ¼” dowel pin. Each hole can also be used as a clamping hole using the ¼-20 thread.
- In addition to the ¼-20 holes, the plate also has (16 Red) 10-32 holes which are positioned to mount our Sherline rotary table and tilting angle table.
- There are (5 Black) ¼” through holes for locating the tooling plate square to the table.
- There is one (Purple) 5/16″ oiler access hole so you can fill the mill saddle oiler without removing the tooling plate.
- There are (10 Blue) T-nut mounting holes to assemble the plate to our mill table.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Sherline Products
Are you Sherline Products representative? Claim This Page Today!
No one from Sherline Products has updated the information yet
Claim Sherline Products Page to edit and add data
Claim Sherline Products Page to edit and add data
Frequently Asked Questions
The tooling plate is 8" x 18" x ¾".
The tooling plate is made of black anodized 6061 aluminum.
The slide has 5" of Y-axis travel and 13.6" of X-axis travel.
Yes, the handwheels are calibrated in .001" increments for the inch slide and in .01mm increments for metric.
Yes, custom tooling plate hole patterns can be quoted upon request.