All Categories
Fiber Lasers

No parameters available.

  1. Home
  2. Lasers
  3. Fiber Lasers
  4. Fiber Optics & Laser Accessories

Fiber Optics & Laser Accessories

Conquer Electro-Optic Modulator (780nm-1550nm) | LiNbO3 Phase Modulator Intensity Modulator
Beijing Conquer Photonics Co., Ltd.
Add to watch list
Conquer Electro-Optic Modulator (780nm-1550nm) | LiNbO3 Phase Modulator Intensity Modulator
Compare
The LiNbO3 phase modulator is widely used in high-speed optical communication system, laser sensing and ROF systems because of well electro-optic effect. The R-PM series based on Ti-diffused and APE technology, has stable physical and chemical characteristics, which can meet requirement of the most applications in laboratory ...

Specifications
Data Sheet
Inquire Price
MM Pump Laser Protector
DK Photonics
Add to watch list
MM Pump Laser Protector
Compare
The Pump Laser Protector, also called Pump Protection Filter, is a passive component which allows maximum transmission from a discrete fibre-coupled pump laser diode and blocks par asitic signals around the centre wavelength of the laser from being reflected back into the laser. Depending on the fiber type of laser diode, we ...

Specifications
Data Sheet
Inquire Price
C-Band 40 GHz QPSK (IQ) LiNbO3 Modulator
GKER Photonics
Add to watch list
C-Band 40 GHz QPSK (IQ) LiNbO3 Modulator
Compare
The GKER Photonics C-Band 40 GHz QPSK (IQ) LiNbO³ Modulator is engineered to deliver superior performance in high-speed optical communication applications. Utilizing a dual parallel structure of Mach-Zehnder modulators (DP-MZM) embedded in a Mach-Zehnder Super-Structure, this modulator offers outstanding modulation capabilities. ...

Specifications
Operating Wavelength Range: 1525-1570 nm
Insertion Loss, IL (2): - dB
Phase-MZI Optical Extinction Ratio: 24 dB
RF-MZI Optical Extinction Ratio: 24 dB
PER: 20 dB
Data Sheet
Inquire Price
C-Band 10 GHz High Bandwidth Zero-Chirp LiNbO3 Intensity Modulator F10
GKER Photonics
Add to watch list
C-Band 10 GHz High Bandwidth Zero-Chirp LiNbO3 Intensity Modulator F10
Compare
The GKER Photonics C-Band 10 GHz High Bandwidth Zero-Chirp LiNbO₃ Intensity Modulator (F10) is a cutting-edge solution designed for high-speed optical communication systems. Built using the highly reliable Mach-Zehnder Interferometer (MZI) architecture on an X-Cut, Y-Propagating lithium niobate substrate, this modulator provides ...

Specifications
Operating Wavelength: 1525 -1570 nm
Insertion Loss: - dB
Extinction Ratio: 20 dB
PRBS Eye Extinction Ratio: 13 dB
Chirp, Alpha Parameter: -0.1 nominal
Data Sheet
Inquire Price
C-Band 10 GHz LiNbO³ Phase Modulator PM10-C
GKER Photonics
Add to watch list
C-Band 10 GHz LiNbO³ Phase Modulator PM10-C
Compare
The GKER Photonics C-Band 10 GHz LiNbO₃ Phase Modulator (PM10-C) is a high-performance phase modulator designed to meet the stringent requirements of advanced optical communication systems. This modulator operates over the C-Band and is engineered with Z-Cut Lithium Niobate (LiNbO₃) technology, ensuring low drive voltage and superior ...

Specifications
Operating Wavelength Range: 1530-1565 nm
Insertion Loss, IL: - dB
Optical Return Loss, RL1: 40 dB
Polarization Dependent Loss1: 5 dB
S21 Electro-optic Bandwidth: 10 GHz
Data Sheet
Inquire Price
PPLN/PPLT pigtailed device/modules/mixers
HC Photonics Corp.
Add to watch list
PPLN/PPLT pigtailed device/modules/mixers
Compare
HCP proudly introduces the latest-generation 5W fiber-coupled waveguide mixer to the growing quantum market as well as advanced scientific fields. Unlike some lab-designed demo unit, this is a fully commercialized device, ready for delivery at any time anywhere. With its superb efficiency and high power sustainability, a pump of 10W ...

Specifications
Crystal Type: LiNbO3 (Lithium Niobate), LT (LiTaO3)
Phase Mathcing Type: Type I, Type II
Data Sheet
Inquire Price
High Quality Cladding Power Stripper
Connet Laser Technology Co., Ltd.
Add to watch list
High Quality Cladding Power Stripper
Compare
Connet high quality cladding power stripper has unique optical properties. This device can absorb the light transmitted in the inner cladding of the double-clad fiber.  In double-clad fiber, all the light transmitted in the optical waveguide formed by the inner cladding with large numerical aperture (>/=0.46) and the ...

Specifications
Operating Wavelength: 1030-1080 nm
Input/output Fiber Type: Nufern LMA-GDF-20/400-M
Numerical Aperture (NA): 0.065/0.46
Min. Stripping Rate: >98%
Max. Stripping Power: >200W or >50W depending on the model
Data Sheet
Inquire Price
Amonics - EDFA Educational Kit
Amonics Limited
Add to watch list
Amonics - EDFA Educational Kit
Compare
Use Amonics’ EDFA education kit to acquire hand on experience in building erbium-doped fiber amplifier and measuring optical gain, noise figure for Erbium-doped fiber length optimization. Amonics’ EDFA education kit is fully connectorized, no fusion splicer required for making fiber connections.

Specifications
Component #1: Benchtop with 980nm pump laser
Component #2: C-band DFB laser
Component #3: Handheld porwer mete
Component #4: Erbium-doped fiber module
Component #5: Optical isolators
Data Sheet
Inquire Price
Fiber Laser Cable (QBH)
Shenzhen Oscom Technology Co., Ltd
Add to watch list
Fiber Laser Cable (QBH)
Compare
XHP fiber laser cable(QBH) features low loss, high holding power, high reflective capability, with water-cooling and safe-lock options, stable and reliable. It can be integrated into fiber laser device, laser processing system and direct semi-fiber coupling laser, etc. Please use the "REQUEST QUOTE" form to contact us directly.

Specifications
Operating Wavelength: 900-1100 nm
Diameter Of Fiber Core: 10-800 um
Numerical Aperture: 0.06/0.39
Transmission Loss: 2%
Forward Cladding Power: 100W w
Data Sheet
Inquire Price
1 Micron All Fiber Isolator
AdValue Photonics
Add to watch list
1 Micron All Fiber Isolator
Compare
World’s first all-fiber isolator utilizes AdValue Photonics’ proprietary fiber technology, eliminating all free-space elements and containing no open optical surfaces. Its design is inherently reliable and ideal for high power fiber laser applications.  An isolator is typically used to block light traveling in the ...

Specifications
Data Sheet
Inquire Price
Quantum Limited Photoreceiver QL01-B
Hobbs ElectroOptics
Add to watch list
Quantum Limited Photoreceiver QL01-B
Compare
The QL01-A/B are the first of a family of advanced photoreceivers from Hobbs ElectroOptics. Offering a previously unattainable combination of low noise and high speed, they allow measurements at the quantum (shot noise) sensitivity limit in a full 1 MHz bandwidth at light levels from as low as 35 nanowatts up to a few microwatts. The ...

Specifications
Data Sheet
Inquire Price
Quantum Limited Photoreceiver QL01-A
Hobbs ElectroOptics
Add to watch list
Quantum Limited Photoreceiver QL01-A
Compare
The QL01-A/B are the first of a family of advanced photoreceivers from Hobbs ElectroOptics. Offering a previously unattainable combination of low noise and high speed, they allow measurements at the quantum (shot noise) sensitivity limit in a full 1 MHz bandwidth at light levels from as low as 35 nanowatts up to a few microwatts. The ...

Specifications
Data Sheet
Inquire Price
0.1GBPS-100GBPS AOC-TRANSCEIVER BIT ERROR RATE TESTER
Liverage Technology Inc
Add to watch list
0.1GBPS-100GBPS AOC-TRANSCEIVER BIT ERROR RATE TESTER
Compare
iBERT X1 mini is a bit error rate tester (BERT) designed for 0.1Gbps to 100Gbps AOC measurement. There are two interchangeable slot boards which include QSFP and SFP ports separately. Both QSFP and SFP ports follow QSFP MSA and SFP MSA. The user interface allows you to individually monitor bit error rate, error count and timer by ...

Specifications
Data Sheet
Inquire Price
BIT ERROR RATE TESTER
Liverage Technology Inc
Add to watch list
BIT ERROR RATE TESTER
Compare
Bit Error Rate Test (BERT) is a testing method for digital communication circuits that uses predetermined stress patterns consisting of a sequence of logical ones and zeros generated by a test pattern generator. A BERT typically consists of a test pattern generator and a receiver that can be set to the same pattern. It can be used in ...

Specifications
Data Sheet
Inquire Price
Nozzles and Other Fiber Laser Accessories
Laser Mech Replacement Parts & Service
Add to watch list
Nozzles and Other Fiber Laser Accessories
Compare
Laser Mech RPS offers a full selection of nozzles for other makes of fiber lasers. For assistance in finding the nozzle you need, please call us at (800) 207-9014.

Specifications
Data Sheet
Inquire Price
Amonics Optical Communication Platform
Amonics Limited
Add to watch list
Amonics Optical Communication Platform
Compare
The new Amonics Optical Communication Platform (AOCP-100) is designed to house up to 8 optical plug-in modules including tunable laser, optical fiber amplifier, optical power meter, variable optical attenuator, DFB laser, SLD, opticalswitch and many more. All modules are supported by Amonics. Users can control and monitor each module ...

Specifications
Data Sheet
Inquire Price
Carbide Wood Lathe Knifes CNC Lathe Cutters for Woodturning Lather Machine
Suzhou RicoCNC Machinery Co.,LTD
Add to watch list
Carbide Wood Lathe Knifes CNC Lathe Cutters for Woodturning Lather Machine
Compare
Carbide CNC Wood Lathe Knifes for Wood-turning CNC Lather Machine This CNC wood lathe knife is a new design carbide wood lathe cutter, it is used with CNC wood turning lathe machine, reduces the tool changing times greatly during one day working. This carbide lathe knife eliminates the need for frequent sharpening which is very ...

Specifications
Model: carbide wood lathe knives
Size: 20*20*150mm / 25*25*150mm
Data Sheet
Inquire Price
ISO30 Toolholder Forks ATC Tool Grippers for Woodworking CNC Routers
Suzhou RicoCNC Machinery Co.,LTD
Add to watch list
ISO30 Toolholder Forks ATC Tool Grippers for Woodworking CNC Routers
Compare
ISO30 Plastic Tool Finger Forks for HSD Auto Tool Changer CNC Routers ISO30 plastic tool finger also called ISO30 tool holder finger, ISO30 tool cradle, ISO30 tool holder fork, ISO30 tool grippers, ISO30 tool clips, ISO30 replacement holder.These replacement tool holder fingers are plastic forks for iso30 tool holders, the plastic ...

Specifications
Model: iso30
Data Sheet
Inquire Price
Free Space Isolator 1um
Optizone Technology
Add to watch list
Free Space Isolator 1um
Compare
Optizone is manufacturing and customizing isolators for Fiber Laser systems, and one of the isolators is Free Space both ends.  The Clear Aperture is from 1.6mm with polarization Insensitive type.  We are offering the isolator at lower cost and high transmission for both CW and Pulse systems.  The Power is up to 50W ...

Specifications
Wavelength: 1030/1064/1080 nm
Handling Power: 10, 20, 30, 50 W
Clear Aperture : 1.6 mm
Data Sheet
Inquire Price
Free Space Isolators 1um Sensitive
Optizone Technology
Add to watch list
Free Space Isolators 1um Sensitive
Compare
Optizone is manufacturing and customizing isolators for Fiber Laser systems, and one of the isolators is Free Space both ends.  The Clear Aperture is from 1.6mm to 2.8mm with polarization Sensitive type.  We are offering the isolator at lower cost and high transmission for both CW and Pulse systems.  The Power is up to ...

Specifications
Wavelength: 1030/1064/1080 nm
Handling Power: 10W, 20W, 30W, 50W W
Clear Aperture: 1.6mm, 2.0mm, 2.8mm mm
Data Sheet
Inquire Price
There are 29 different Fiber Optics & Laser Accessories from suppliers and manufacturers listed in this category. In just a few clicks you can compare different Fiber Optics & Laser Accessories with each other and get an accurate quote based on your needs and specifications. Please note that the prices of Fiber Optics & Laser Accessories vary significantly for different products based on various factors including technical parameters, features, brand name, etc. Please contact suppliers directly to inquire about the details and accurate pricing information for any product model. Simply navigate to the product page of interest and use the orange button to directly reach out to the respective supplier with one click.