PPM-003C Laser Source
Description
The PPM includes one diode laser, a driver control board and a TEC cooler, with one 10-pin connector. The PPM provides up to 3.5W of optical power output, which is launched into a 3 meter multimode fiber (62.5/125 μm, NA 0.27) with FC connector at nominally 976 nm wavelength. An extra heat sink for the PPM module is required to provide sufficient cooling when operating under different environmental conditions. This unit is designed only for use when connected to a photovoltaic power converter (PPC), purchased separately.
PPM-003C Laser Source
Specifications |
|
|---|---|
| Laser Type: | Modulated |
| Fiber Type: | Multi-Mode |
| Wavelength: | 976 nm |
| Output Power: | 3500 mW |
| Fiber Core Diamater: | 62.5 um |
| Fiber Cladding Diameter: | 125 um |
Features
976nm laser source
Up to 3.5W laser power out
Adjustable power levels
FC / ST connector available
Compact design and easy to integrate
Applications
Current Measurement (ECTs)
Non-ECT Sensors
Power Electronics
EMC Testing
RF over Fiber & 5G
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Taiwan
-
Sold by:
-
On FindLight:
External Vendor
Claim MH GoPower Company Limited Page to edit and add data
Frequently Asked Questions
Yes, an extra heat sink is required for the PPM-003C to provide sufficient cooling when operating under different environmental conditions.
The PPM-003C is designed only for use when connected to a photovoltaic power converter (PPC), which must be purchased separately.
The PPM-003C can provide up to 3.5W of optical power output.
The laser source in the PPM-003C has a wavelength of nominally 976 nm.
The PPM-003C has an FC connector available.