FILTER PRODUCTS

Select a category above to apply technical filters

Page 25 - Semiconductor Lasers (Diode Lasers)

ILEE LDA STANDARD
ILEE AG
ILEE® LDA STANDARD.  

Specifications

Center Wavelength: 0.635 um
Output Power: 1 mW
Data Sheet
DP-PS Laboratory Diode Driver
Kigre Inc
Kigre manufactures a laboratory laser diode driver for use with the MK-88, 85, 82, 81 and MK-11 laser heads. The driver features precision pulsed current operation and supports the HESP family eye-safe laser diode requirements. A USB cable and software are provided so that the customer may use their computer as a laser controller. ...
Data Sheet
B1675 Miniature DPSS Laser Driver
Kigre Inc
The Kigre B1675 is a Bluetooth® compatible, miniature driver optimized for the Kigre DPSS family of lasers, including the MK11, MK81, MK82 and MK85. The driver provides 100A square pulses of current (up to 3mS) with typical I/O efficiency of 92%. Features include reverse input voltage and current protection, under-voltage ...
Data Sheet
MK-830-PS Laboratory Laser Driver
Kigre Inc
Kigre manufactures a laboratory laser diode driver for use with the MK-11, 25, 82, 85 & 88 laser heads. The driver features precision pulsed current operation and supports the HESP family eye-safe laser diode requirements. A USB cable and software are provided so that the customer may use their computer as a laser controller. The ...
Data Sheet
TeraPyro Sensor
Lytid
The TeraPyro sensor is a compact and highly sensitive device, based on the combination of a high-quality absorbing black coating, paired with a LiTaO3 pyroelectric crystal. The broad absorption range of the coating allows the use of this sensor over a large spectral range (from 0.1 to 30 THz). The high sensitivity and low NEP offer ...

Specifications

Output Power (avg): 2 W
Wavelength: 3000 um
Pulse Duration: 1-1ns
Tuning Range Around Center Wavelength: Not Applicable
Data Sheet
TeraCascade 1000 Series Laser Source
Lytid
The TeraCascade 1000 series is an award -winning THz source based on state-of-theart quantum cascade laser technology. It is the perfect tool to explore the supra-THz frequency range. With up to 6 chips at select frequencies between 2 to 5 THz in one system and a guaranteed average output power of more than 1 milliwatts in CW or QCW ...

Specifications

Output Power (avg): .001 W
Wavelength: 60 um
Pulse Duration: 1-1ns
Tuning Range Around Center Wavelength: Not Applicable
Data Sheet
TeraCascade 100 Series Laser Source
Lytid
The TeraCascade 100 series is a costeffective THz source based on state of the art quantum cascade laser technology. It is the perfect tool to explore the high THz frequency range. With an average output power of more than 100 microwatts from 2 to 5 THz, single or multimode emission, you can perform many applications such as high ...

Specifications

Output Power (avg): 0.1 W
Wavelength: 60 um
Pulse Duration: 1-1ns
Tuning Range Around Center Wavelength: Not Applicable
Data Sheet
LDDHC High Current Diode Laser Drivers
Lumina Power Inc
The LDDHC series is a new family of OEM laser diode drivers designed for the emerging high power laser diode industry. With output currents to 200amps the LDDHC series is available in 3 power levels and a wide range of compliance voltages. Compact size is possible due to the low-loss Zero Voltage Switching inverter and ...
Data Sheet
LDN Series Laser Diode Drivers
Lumina Power Inc
The New LDN series laser diode drivers are the second generation of precision CW/Pulsed diode drivers offered by Lumina Power. Building on more than a decade of experience in laser diode driver technology the new LDN family incorporates the features of the LDD and LDY models. New upgrades include increased energy storage for better ...
Data Sheet
LDP Pulsed-CW Laser Diode Drivers
Lumina Power Inc
The LDP pulsed laser diode drivers are the second generation of precision pulsed diode drivers offered by Lumina Power. Building on more than a decade of experience in laser diode driver technology the new LDP drivers are capable of outputting up to 400 amps. Pulse widths of 50µs through CW operation are now possible at ...
Data Sheet
For laser mounting a thin layer of vacuum-deposited AuSn can be selectively applied over conductor areas. The standard alloy ratio is nominally 76Au/24Sn, normally at ~4-5 microns thick. On reflowing, the Au in the underlying conductor and on the underside of the laser chip, combine with the pre-deposited solder to form an alloy ...
Data Sheet
Various metallisation schemes can be applied to form conductors, integral resistors, solder barriers, solder dams etc.  The Au and barrier layer thicknesses depend on the application. Generally for Au wire bonding 0.5µm minimum of Au is required. For Pt or Pd barrier layers a minimum of 0.2µm is usually specified. ...
Data Sheet
The ceramic substrate material is Aluminium Nitride (AlN). Standard grade is 170W/m·K. 200W/m·K is also available. Typical properties are: TC (W/m·K) ~170CTE (ppm/°C) ~4.6Dielectric constant ~8.8 @ 1MHzThe AlN substrate material is available with as-fired, lapped or polished surface finishes. Standard ...
Data Sheet
L44-47-122-228-X ESD Absorber For Laser Diodes
LASORB
The L44…228-X series LASORB device is a 2-pin through-hole version of our ESD absorber, designed and tested specifically to protect red and infrared laser diodes and other optoelectronic devices that have an operating voltage between 1.8V and 2.2V. It provides protection against reverse bias as well as fastchanging forward ...
Data Sheet
L44-47-122-208-X ESD Absorber For Laser Diodes
LASORB
The L44…208-X series LASORB device is a 2-pin through-hole version of our ESD absorber, designed and tested specifically to protect red and infrared laser diodes and other optoelectronic devices that have an operating voltage up to 2.2V. It provides protection against reverse bias as well as fast-changing forward bias ...
Data Sheet
L44-47-121-392-X ESD Absorber For Laser Diodes
LASORB
The L44…392-X series LASORB device is a 2-pin through-hole version of our ESD absorber, designed and tested specifically to protect high power red laser diodes and other optoelectronic devices that have an operating voltage between 2.1V and 3.8V. It provides protection against reverse bias as well as fastchanging forward bias ...
Data Sheet
F8 Fiber Coupled Laser Diode
Lasertel
New F8 Fiber Coupled Laser Diode.

Specifications

Laser Type: Continuous Wave (CW)
Fiber Type: Single Mode
Wavelength: 976 nm
Output Power: 500000 mW
Fiber Core Diamater: 225 um
...
Data Sheet
LG Standard CW Semiconductor Laser
LaserTechs eK
LaserTechs offers OEM Laser Modules with emission in the visible wavelength range, e.g. 375, 405, 445, 473, 520, 635, 650, 660, 670, 690 nm, and the near IR-range (780 - 1550nm). Compact green DPSS-Modules and LED-Modules are also available. Our products are based on a \"building block\" design. This means you can ...

Specifications

Center Wavelength: 0.638 um
Output Power: 100 mW
Data Sheet
LT Safe CW Semiconductor Laser
LaserTechs eK
LaserTechs offers OEM Laser Modules with emission in the visible wavelength range, e.g. 375, 405, 445, 473, 520, 635, 650, 660, 670, 690 nm, and the near IR-range (780 - 1550nm). Compact green DPSS-Modules and LED-Modules are also available. Our products are based on a \"building block\" design. This means you can ...

Specifications

Center Wavelength: 0.520 um
Output Power: 30 mW
Data Sheet
LT Intelligent CW Laser
LaserTechs eK
LaserTechs offers OEM Laser Modules with emission in the visible wavelength range, e.g. 375, 405, 445, 473, 520, 635, 650, 660, 670, 690 nm, and the near IR-range (780 - 1550nm). Compact green DPSS-Modules and LED-Modules are also available. Our products are based on a \"building block\" design. This means you can ...

Specifications

Center Wavelength: 0.450 um
Output Power: 50 mW
Data Sheet
LD635A5C14 635nm CW Laser Diodes
Lasermate Group Inc
Lasermate Group, Inc. proudly offers RoHS compliant, low cost and high quality standard laser diodes in the red spectral range from 635nm to 685nm with output power of 5mW to 700mW. Our standard CW infrared laser diodes are available in a variety of packages, such as TO-33 (Φ3.3 mm), TO-18 (Φ5.6 mm), TO-5 (Φ9 mm), TO-3, C-Mount, ...

Specifications

Center Wavelength: 635 um
Output Power: 5 mW
Data Sheet
LD635B5A14 635nm CW Laser Diodes
Lasermate Group Inc
Lasermate Group, Inc. proudly offers RoHS compliant, low cost and high quality standard laser diodes in the red spectral range from 635nm to 685nm with output power of 5mW to 700mW. Our standard CW infrared laser diodes are available in a variety of packages, such as TO-33 (Φ3.3 mm), TO-18 (Φ5.6 mm), TO-5 (Φ9 mm), TO-3, C-Mount, ...

Specifications

Center Wavelength: 0.635 um
Output Power: 5 mW
Data Sheet
LD635A5A14 635nm CW Laser Diodes
Lasermate Group Inc
Lasermate Group, Inc. proudly offers RoHS compliant, low cost and high quality standard laser diodes in the red spectral range from 635nm to 685nm with output power of 5mW to 700mW. Our standard CW infrared laser diodes are available in a variety of packages, such as TO-33 (Φ3.3 mm), TO-18 (Φ5.6 mm), TO-5 (Φ9 mm), TO-3, C-Mount, ...

Specifications

Center Wavelength: 0.635 um
Output Power: 5 mW
Data Sheet
LDTC Laboratory Series Combination Laser Driver And Temperature Controller
Laser Physics UK Ltd
The LDTC LAB series of instruments integrate precision temperature control and low-noise laser current output. The temperature controller half is compatible with a variety of temperature sensors, including thermistors, RTDs, linear current, and linear voltage sensors. The laser driver half is compatible with all laser diode and ...
Data Sheet
FL-500 Laser Diode Driver
Laser Physics UK Ltd
The FL500 is ideal for driving low power laser diodes. It operates from 3 to 12 V, so is compatible with Li+ battery operation. It can be configured as two totally independent 250 mA drivers or a single 500 mA driver. Compatible with Type A or B laser diodes. The FL500 allows for quick and easy operation in Constant Current (CC) ...
Data Sheet