Non-Magnetic 710 Series
Description
TMC's CleanTop Optical Top, available in a non-magnetic construction, is recommended for applications requiring the support of a high-strength magnet or the maintenance of a homogenous magnetic field. Though no alloy of stainless steel can be 100% non-magnetic, the 316 alloy top and bottom layers offer a dramatic reduction in ferromagnetic properties. At the same time the sidewalls and cups are completely non-ferrous.
Non-Magnetic 710 Series
Specifications |
|
|---|---|
| Table Material: | Steel |
| Hole Pattern: | Custom |
| Table Length: | 600 mm |
| Table Width: | 600 mm |
| Table Thickness: | 5 mm |
| Flatness: | +/- 0.005 mm/mm^2 |
Features
Liquid spills on the surface are contained and cannot reach the top's honeycomb core.
The core is completely clean and dry with no residual thread-cutting oils to out-gas.
Extremely clean tapped holes make screw insertion smooth and simple.
Easy retrieval of small parts dropped into the holes is assured.
Since no penetration of the core is possible when dangerous chemicals are used on the top's surface, health hazards will not occur by chemicals reaching the core unnoticed.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim TMC Page to edit and add data
Frequently Asked Questions
Yes, there are CleanTop Accessories & Options available for the Non-Magnetic 710 Series.
No, penetration of the core is not possible when dangerous chemicals are used on the top's surface, so health hazards will not occur by chemicals reaching the core unnoticed.
The core of the Non-Magnetic 710 Series is made of 304 steel alloy honeycomb, closed cell, 0.01 in. (0.2 mm) thick foil.
The Non-Magnetic 710 Series is a CleanTop Optical Top that is recommended for applications requiring the support of a high-strength magnet or the maintenance of a homogenous magnetic field.
The top and bottom skin of the Non-Magnetic 710 Series is 316 alloy stainless steel - 3/16 in. (5 mm) thick.