Ultra Galvo Scanner XXXS
Description
Ultra Galvo Scanner XXXS
Specifications |
|
|---|---|
| Max Aperture (Beam) Size: | 7 mm |
| Wavelength: | 355 nm (UV), 532 nm (green), 1064 nm (IR), 10.6 um (IR) |
| Max Scan Angle: | -- degrees |
| Repeatability: | -- μrad |
| Linearity: | -- % |
| Rotor Inertia: | 0.013 g·cm2 |
| Torque Constant: | 1.2 mN·m/Amp |
| Peak Current: | 6 Amp |
| Max Coil Temperature: | -- °C |
| Coil Resistance: | 2.1 Ohms |
| Coil Inductance: | 0.035 mH |
| Back EMF Voltage: | -- mV/deg/ sec |
| Weight: | 13 g |
Features
- Through kinematics and dynamics simulation, the mirror with certain inertia is matched for each galvanometer. Moreover, the rotor of the galvanometer has been optimized and has excellent dynamic properties and response characteristics.
- In addition, high precision miniature bearing axial preloads ensure high rigidity and low friction operation, and special attention is paid to bearing life.
- Photoelectric galvanometer is a kind of galvanometer which uses photoelectric sensor as feedback system. It is characterized by high repetition accuracy and linearity, and high cost performance.
- Galvanometer scanning mirror is available for common laser wavelengths and energy levels. Moreover, all the mirrors are optimized to take into account the inertial load, rigidity and flatness of the lenses.
- Photoelectric galvanometer is widely used in flight marking, precision marking, precision cutting, precision welding and other industries.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
China
-
Sold by:
-
On FindLight:
External Vendor
Claim Han's Laser Corporation Page to edit and add data
Frequently Asked Questions
The Ultra Galvo Scanner XXXS is widely used in galvo laser welding, flight marking, precision marking, precision cutting, and other industries.
The key features of the Ultra Galvo Scanner XXXS include optimized rotor for excellent dynamic properties, high rigidity and low friction operation, and compatibility with common laser wavelengths and energy levels.
The input beam aperture size for the Ultra Galvo Scanner XXXS is less than 7mm.
The maximum continuous current for the Ultra Galvo Scanner XXXS is 2.3A.
The rise time for the Ultra Galvo Scanner XXXS is not specified in the provided information.